2006 IronHorse Sunday Custom Build

For Sale is my custom built IronHorse Sunday. Spec is as follows:

-Frame
-2006 IronHorse Sunday Factory Frame in small. "The Factory frame uses 6069 tubing with a different toptube butting profile, down tube butting profile, & chainstay alloy. It weighs slightly less, & is USA made" (compared to the Team and World Cup frames which were made in Taiwan and use 6061 tubing)
I had it powdercoated about 2 years ago and put on new slik graphics and had it lacquered. All the pivot bearings were replaced late last year. No play in the frame at all.

-Forks
-Fox 40 RC2 fitted with K9 thrust bearing. Serviced by Mojo last year. I have frequently changed the oil and seals and had them serviced every year since I have had them. There is a couple of small scratches on the top of the left stanchion but it doesn't affect the performance at all.

-Shock - Fox DHX5.0 Serviced by Mojo last year. Like the forks they were serviced every year.
-FRONT WHEEL NOT INCLUDED. But you could pick up a wheel of the same quality (or better) for around £40-50
-Rear wheel
-Rim - Halo Freedom Disc 36h in Red
-Hub - Hope Bulb 36h in Black
-Spokes - DT Swiss Champion in Black
-Nipples - DT Swiss Brass
-Tyres - Specialized Butcher 2.3" only a few rides old
-Brakes - 2007 Avid Code 5. Re-bled every 6 months or so
-Rotors - 203mm Aztec DH
-Bars - Answer Pro Taper DH
-Stem - Raceface Atlas direct mount stem. Can be flipped upside down to have either 30mm length and 24mm raise or 50mm length and 8.5mm raise
-Headset - Superstar Grande Bambino
-Grips - Nukeproof Element Skinny
-Shifter - Sram X9
-Rear Mech - Shimano Zee
-Cranks - Shimano Saint with Slik Graphics protector decals
-Pedals - Nukeproof Nanotech Flats
-BB - Shimano XT
-Chainring - E Thirteen Guide Ring 36t
-Cassette - Sram PG950 9 Speed
-Chain - Shimano
-Chainguide - E Thirteen LG1
-Seat - Selle Italia XC SL
-Seatpost - Da Bomb Hellfire XC
-Seat Clamp - Hope QR

Bike is as same in the pictures except tyes, seat, rear mech and fork decals which were changed to newer style ones last time they were serviced and there is a headtube badge on now

There is a small dent in the bottom of the bottom bracket shell and the side of the downtube but they do not effect it at all.

The owner before me fitted a new DW link/rear triangle axle, a new Rocker link axle and new bearing caps from Orange to replace the old countersunk versions at the end of 2010.

I'm looking for £900 + £30 postage or can be collected from Newbury, Berkshire. Price dropped from £1300

I may be willing to split if I can find a buyer for the frame first.

Cheers, Sam