2013 Canfield Nimble 9 Frame

Hello there. I'm selling my 2013 Canfield Nimble 9 29er Frame in limited edition chrome. My original post was for the whole bike, but I've received a lot of interest in just the frame. Below is the original post with the build spec. If you see something else you like, make me an offer. AGAIN, THIS AD IS FOR THE FRAME ONLY (and the red Salsa seat collar). Thanks!


I received the frame in late June of 2013, and put it up on blocks (so to speak) when I built up my new bike this spring. So basically, the frame has not seen a full season of use. The chrome is in very good condition. There is some slight discoloration from where I removed the decal on the down tube (the photo makes it look worse than it is). I've got a new decal set coming, and that will cover most of the offending area. No dents, and a couple of very slight abrasions/cable rub. I do not have the SS dropout, but installed is the newer post mount drop out that makes removing and installing the wheel a snap. I prefer paypal, but may work out other payment options. Shipping included in price.

Here's the build spec:

Front Wheel: Hope Pro 2 laced to WTB i23. Straight and true.
Rear Wheel: Chris King (bolt conversion) laced to WTB i23. Straight and true.
Bontrager 29-4 2.3 (lots of tread) set up tubeless with Stan's.
Manitou Tower Pro 120mm fork (some hose rub on crown).
Thompson X4 70mm stem.
Salsa seat collar.
USE SX shockpost.
Hope Mono Mini Ti brakes with stainless steel braided lines 180mm front and rear,
Sram x-9 9speed rear shifter and der.
Sram x-9 Gripshift front.
Sram X-O 2x front der.
Race Face Turbine 725mm bars.
Terry Fly Ti saddle.
XT 11-32 cassette.
Salsa guard and 36t ring and Shimano 22t granny.
Cane Creek 40 headset. Photo shows King top cap. Bike will be sold with Cane Creek top cap.
Race Face Prodigy cranks.
New cables and housing.
29lbs.

Sold without pedals.

Some info on the frame:

Features:

4130 chromoly steel
68° head angle with a 120mm fork
Adjustable 16.25“ – 16.9” chainstays
Lower toptube for increased stand over height
Custom sliding 135mm x 10mm rear dropouts for geared or single speed options
NEW hydroformed toptube
ED Black treated for corrosion resistance
Removable direct mount front derailleur block
Improved chainstay heel clearance
Two water bottle bosses
6.5 lbs (estimated)
$750 US retail, ($800 Limited Edition Chrome)
Build Specs:

Recommend fork lengths – 100mm – 120mm
Headset – 44mm upper and lower cups
Front derailleur – Shimano direct mount – top pull, single bolt, or Sram HO series
Bottom bracket – 73mm
Seat post – 30.9mm
Seat clamp – 35mm
Rear dropout spacing – 135mm
Post brake mount