2014 Santa Cruz Blur TRc Carbon Frame

I built up a brand new Blur TRc in late August and have just disassembled it, cleaned it, and greased the bearings.

-142x12mm DT Swiss RWS thru-axle included.
-The Santa Cruz grease gun will be included.
-Frame weight with headset cups(not included) is 4.4lbs!!!
-Includes ti shock bolts, but no shock. It utilizes a 7.875x2.0 AKA 200x50mm shock, so you can purchase your own DB Inline instead of a stock shock.
-Internal dropper post routing is featured on this frame.
-The 44/49 tapered headtube can accommodate an angleset if you want to slacken the bike out even more than its already slack(for 125mm) 68 degree head tube angle.

Excellent, lightweight frame with a low BB and slack head angle(for a 125mm travel bike). It pops off lips and it's so much easier to throw around because of its shorter travel, yet it still handles everything I rode on my 6" travel bike because of the geometry. Shorter chainstays than 27.5" bikes make this bike very flickable, easier to manual, yet pedals with incredible acceleration for an all-day ride with climbing.

Only minor signs of use: cable rub, signs of chain contact on the chainstay protector(although both chainstay and seatstay were mostly wrapped during riding), and built up in August 2014, so it has not had a long life. No damage to the carbon whatsoever, anywhere on the frame!

Let me know if you have any questions. For your peace of mind, I always take photos of the open box with the item inside at the shipping counter scale and provide tracking info ASAP. Thanks. -Ron