2013 DiamondBack Mason 29" ROLLER: Price Drop!

*ROLLER* Needs drivetrain, rotors, and brake adapters to match rotor size.
$900 OBO. This is below what I have into it so I'm just passing along a good build at used market cost. You could get a good deal, within reason. Will ship.

The Good:
The tires, bars and grips are brand spanking new. Everything else I sourced secondhand, all very lightly used. I haven't ridden any of these parts.
Deemed an "All-Mountain" 29er with slack head angle, lower bb, and tight chainstay, this should be a fun bike, has all the new goodies, but unfortunately I can't finish it.
All the parts color match and look great, great quality items, I searched for items like the Funnduro which can't be found in solid red anymore, look up the new Funnduro colors ;)
The KS Dropzone collar and remote are also the same red, and the remote lever replaces the inner clamp of the ODI grip. The KS and Manitou stanchion color matches too.
Hadley and the wheels speak for themselves. The engagement points and titanium freehub are mechanical gold. DT Swiss and Sun rims also industry standards.
The Manitou feels nice with clean stanchions. You can feel the difference in each turn of the ABS+ adjustments and the HexLock axle is different but I think it's clean.
I was planning to wrap the fork in black to match the rear triangle if I could finish it and the tires were too wide for another build so I threw them on.

The Bad:
The only blemish on the frame is a tiny chip on the top tube (see pic) Only cosmetic. There is NO chainslap or rub, and the axle is still anodized, so low miles.
The stem has a nic in the top plate. (see pic) I bought it this way and was going to run it comfortably.
Both rims have scrapes, the rear has one that is the worst (see pic) the front has two, one nic and one just the label. (see pics) Only cosmetic.
The left brake lever has a scrape on the top and the right has a scraped bolt. Only cosmetic. (see pics)

The Ugly (catalog specs.):
Frame: DiamondBack Mason 29er/29", Medium 17", tapered headtube, ISCG05, 73mm BB, direct mount front derailleur, 12x142mm with Maxle (From aftermarket frame set not complete.)
Headset: FSA Orbit no.57 tapered, sealed cartridge.
Fork: Manitou Tower Pro 29, tapered, 140mm travel, MARS Air, ABS+, 15mm HexLock axle, 7.5" steerer length with star nut.
Wheels: Hadley hubs, F: H600100 15mm, R: SDH135 12x142mm, black, 32h laced via DT Swiss to welded Sun Inferno 27s. (R12.0 on hubs is Hadley's batch # indicating slightly recent batch)
Stem: Funn Funnduro, red, 45mm.
Bars: Funn Fatboy, black, 7mm rise, 810mm width, new and uncut.
Brakes: Avid Elixir CR F/R. Rear needs fluid.
Grips: ODI Ruffian lock-on, red clamps, new.
Seatpost: KindShock Dropzone dropper post, 30.9", 125mm travel.
Seat: Diamondback Mason
Seatclamp: QR, black.
Tires: Continental CruiseContact 2.2", new

DiamondBack Diamond Back DB Mason 29 29er 29" all mountain enduro xc hardtail