2012 Devinci Dixon Medium w/Fox 36 Float

Up for sale is my 2012 Devinci Dixon with custom build. This bike is built up for aggressive XC and even light DH use. 34lbs as it sits mostly due to the DH wheelset and Saint crankset. The fork was a Talas, but I converted it to a Float because I never used the Talas feature. The Talas felt terrible, but the Float is nice and plush. It's hard to tell from the photos, but there is a clear protective film on almost every surface of the frame. If you were to remove the film the frame would look like new. This bike is amazing. So much fun to ride the way I have it set up. You could ride any trail on this bike. Bike shows normal wear and tear, but no dings and no cracks. Highlights are as follows:

2009 Fox 36 Float 160mm - This fork feels great, but definitely has a little bushing play and could use a rebuild. I've adjusted the price accordingly. No visible wear on stanchions.
Rockshox Monarch Plus rear shock with the correct "LL" tune for this bike. This shock feels amazing.
Mavic 721 rims with formula hubs - relatively true with no hops and some small dings/cosmetic damage. Super tough wheel set.
Shimano Saint 170mm single ring crankset with 32 tooth Race Face Narrowwide ring
SRAM PG1050 11-36 cassette
10 Speed SRAM X9 shifter and derailleur were installed last season along with a new chain. Drive-train is dialed. Shifts and performs flawlessly.
Ethirteen LG1 chainguide - I'm running it without the lower roller because I found it to be unnecessary. However, I will include the lower roller with this sale. Running no upper guide did not work for me 100% which I find unacceptable. I have not dropped the chain once with the upper guide installed.
Maxxis Ardent 3C EXO 2.4 front tire in good condition - Kenda xc weight tube
Maxxis DHR II 3C EXO 2.3 rear tire in good condition - Kenda xc weight tube
The pedals pictured are not included! Sorry I love these pedals. I can include Deity compound pedals, or Shimano SLX clipless pedals. Both in great condition. Your choice.
Shimano XT brakes. I will drop $100 off the price if you want me to put Avid Elixer R brakes on instead.
Answer ProTaper DH 780mm handlebar uncut
FSA gravity 60mm stem
Anvil Saddle
Foam grips - I was skeptical, but now I swear by them. They do not move or twist ever.
Original Devinci rear axle required an allen wrench to remove the rear wheel, but I upgraded it to a Maxle from a Trek ABP bike. Took a lot of research to make sure it would fit. It fits and works perfectly.

Well maintained and 100% ready to ride. Price does not include shipping. I will charge actual shipping to the buyer, but I will pay to have the bike professionally packed. Sick deal for a sick bike. I'm also selling my TR250 and planning on upgrading to "One Bike". I would be open to a discount if anyone wants both bikes. Also, I'll drop $200 off the price immediately for a local buyer paying with cash. Text or PM message is best as I'm at work more than I should be.