2014 Fox 34 Factory 29er Talas 140mm FIT

X
Loading...
Prev Next
Category: Single Crown Forks


Wheel Size: 29"
Front Travel: 140 mm
Front Axle: 15 x 100 TA
Original Post Date: Jul-03-2016 11:41:03
Last Repost Date: Aug-30-2016 8:39:32
Still For Sale: Sold
View Count: 639
Watch Count: 1
These are Fox Factory 34 forks for 29er wheels, currently with 140mm of travel. These particular forks are from an ex-pro bike and have been used at EWS and were obviously very well maintained throughout there use there. These particular forks actually feature in a PinkBike bike check on Tracey Moseley's remedy which you can read here http://www.pinkbike.com/news/trek-tracy-moseley-remedy-29-enduro-world-series.html . Since I've had them I've stuck to the service intervals to the letter, using Strava to check their riding hours.

Here are three key features about the forks:

1) Talas. Fox's Talas feature means that the forks have two different travel modes that can be easily be adjusted whilst riding. For this particular 34 it is between 140mm and 120mm. I like this feature because it allows my bike, with its 29er wheels, to change from a trail bike to an xc bike at the flick of a switch. This is perfect for flatter sections or for climbing, as it also steepens the head and seat tube angle in its lower setting.

2) Kashima Coated Factory Spec. This is the special low friction gold coating that Fox apply to their forks. This is only applied to Factory Forks such as these, the name given to Fox's top line forks. When these forks were new they would have cost over £900. The forks have been upgraded at the last Mojo service with lower friction seals.

3) CTD Adjust. CTD stands for Climb, Trail, Descend. This is Fox's three position compression dampening that gives you three levels of firmness in the forks at each Talas height. This is the more advanced CTD adjust version which means that in the mid 'trail' there is a further 3 positions of low speed compression, allowing you to customise the firmness.

The fork is in the standard 15x100 thru-axle spacing and comes with a Fox/Shimano thru-axle. The steerer measurement is just over 170mm. The fork also comes with the brake cable guide. A little bit of cable rub is displayed. The steerer tube has obviously been cut, although not hugely. The length can be viewed in the photos. Collection is welcome or I can post for £5 anywhere in the UK. I can ship these globally, please contact me individually for details of this.
Any questions feel free to message me, or for any offers.
Warning: This listing is out of date. You must Edit this item before you can repost!"
£370 GBP
Restrictions: Reasonable offers only, Will consider bike related trade, Will ship globally
richqwerty avatar
  (Seller History)

Member since Jun 19, 2015
Malvern, United Kingdom
X










You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Related Listings



Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.041589
Mobile Version of Website