2016 Norco, Optic C9.1, XL *Price Reduction*

Silver Norco Optic C9.1 XL

Build this frame into a great bike for those that ride anything from all day cross country loops to smashing down rowdy trails at speed. The 29" wheels let the bike roll over rougher stuff at higher speed than it's shorter travel rear end would usually allow. The efficient rear travel also allows it to climb more easily than any full suspension bike that I have ever previously owned. I ran it with a 130mm fork for a while but the bike became much more playful on the descents when I installed the 140mm air spring, with no noticeable down side in any conditions.

This bike weighs in at 28 lbs without pedals with build listed below, which is great for an XL bike.

This has been a super fun bike that I need to get rid of purely to free up some capital, it includes the Fox Factory EVOL that is on the bike currently.

I am also selling the bike as a complete for $3699 with all the parts listed below. If you decided to buy the frame then any of the parts below are available for a good price.

This is the build which I rode with and is far from a stock build, with a 140mm travel Rock Shox Pike on the front and handbuilt wheels.

Parts On Bike:
-Norco Optic C9.1 29er Carbon frame in Silver
-Rock Shox Pike RCT3 110 mm spacing 130 or 140 mm travel
-Rock Shox Reverb 150mm travel 31.6mm diameter
-Handbuilt Wheels
-Easton ARC 27 rims
-Hope Pro4 hubs
-DT double butted spokes (2 cross drive, 3 cross non drive)
-Easton Havoc 50mm Stem
-Race Face SixC 35mm Clamp Bars 800mm width
-Race Face Sixc 175mm Cranks 30 tooth ring
-SRAM Guide RS Brakes
-180 mm front 160 mm rear centerline rotors
-SRAM X1 shifter and Derailleur
-SRAM GX Cassette

Many Tires
-Unused Schwalbe Magic Mary TrailStar Snakeskin
-Very Slightly used Schwalbe Fat Albert Front 2.35
-Very Slightly used Victoria Morsa G+ 2.3
-Slightly used Schwalbe Nobby Nic 2.35 TrailStar Snakeskin
-Maxxis Tomahawk 2.3 EXO casing
-Maxxis Ardent 2.25 EXO casing

If you have any questions please contact me.