I'm running a Mozartt Presto chainguide with Saint cranks. No spacers on the left BB cup, one spacer on the right one. One 1.5 mm washer on each ISCG bolt.
I'm running a Mozartt Presto chainguide with Saint cranks. No spacers on the left BB cup, one spacer on the right one. One 1.5 mm washer on each ISCG bolt.
I'm running a Mozartt Presto chainguide with Saint cranks. No spacers on the left BB cup, one spacer on the right one. One 1.5 mm washer on each ISCG bolt.
Cheers, I'm using same washers.
I am using the new saint guide. It was a bit tricky setting up. It works nice and was pretty cheap compared to an e -13 or mrp.
I would post a picture of it but I still can not figure out how to do that. There is a picture on my profile of my bike.
nope. I am 6 foot on a medium with a long ass inseam. And at blue mountain you have to pedal a few km's once you get off the lift. I think the last time I rode it I had to pedal to my buddies house after so I jacked it up a bit.
Al though I do find the top tube even lower on a V 10.
Qucik question - I am at work and looking at some forks on-line but don't know what steerer length i need without having my frame to hand. Anyone know off hand the minimum a Summum will need?
Qucik question - I am at work and looking at some forks on-line but don't know what steerer length i need without having my frame to hand. Anyone know off hand the minimum a Summum will need?
summon medium pro 2011, 11cm incl Headset integrated cups, i have 54 mm on top of that which gives me room for a 5 mm spacer under a renthal stem with 3 spacers of various above the stem.
so i'd guess most forks would fit, as they usually sold with 165mm+ steerer... avoid the really cut down ones, obviously!