hey, do any of u notice the fox 40 bumpers dont really work after a couple ride? what do you suggest? thanks
ya my 40 bumpers broke after 1 crash, now my crown is hitting the lower weld on the headtube, i dont really know what you can do besides maybe run a non internal headset bottom cup,
Well, as mentioned it has been hot as hell and ive been pretty buisy...
SO, my bad on this one.... it seems that my B tension screw on the derailer had a loc tite failure and walked its way out thus causing the chain and derailer rub... ... I am feckin stoooopid lol, Fixed it by adjusting the b tension screw and using better and more loctite. I will have to keep an eye on this to see if it continues to Walk, but i doubt it.
Good you found the problem, could you still take a pic? I am curious to see what happened.
hey, do any of u notice the fox 40 bumpers dont really work after a couple ride? what do you suggest? thanks
ya my 40 bumpers broke after 1 crash, now my crown is hitting the lower weld on the headtube, i dont really know what you can do besides maybe run a non internal headset bottom cup,
Why dont u guys give the odi fork bumpers a go... Ive been using them for a lil while now and there great!
hey, do any of u notice the fox 40 bumpers dont really work after a couple ride? what do you suggest? thanks
ya my 40 bumpers broke after 1 crash, now my crown is hitting the lower weld on the headtube, i dont really know what you can do besides maybe run a non internal headset bottom cup,
Why dont u guys give the odi fork bumpers a go... Ive been using them for a lil while now and there great!
I am running these swell and they have been great!
hey, do any of u notice the fox 40 bumpers dont really work after a couple ride? what do you suggest? thanks
ya my 40 bumpers broke after 1 crash, now my crown is hitting the lower weld on the headtube, i dont really know what you can do besides maybe run a non internal headset bottom cup,
i was thinking make your own bumpers, take their design and improve upon it by cutting an offset into some some beefier bumpers
Well, as mentioned it has been hot as hell and ive been pretty buisy...
SO, my bad on this one.... it seems that my B tension screw on the derailer had a loc tite failure and walked its way out thus causing the chain and derailer rub... ... I am feckin stoooopid lol, Fixed it by adjusting the b tension screw and using better and more loctite. I will have to keep an eye on this to see if it continues to Walk, but i doubt it.
Good you found the problem, could you still take a pic? I am curious to see what happened.
I can post one next time i break out the cam it's GF's as mine is busted right now and dont know where she keeps it lol, Its a pretty good chain rub after some point during 2 days resort riding, ( think lots of high gear pedaling resulting in deep scratch ) and has also now been painted to protect the frame, I am glad that it isnt a issue with spesh frame and my own dehydrated dumbass not putting 2 and 2 together after a long day. i do notice the potential for frame Chain rub ironically in the place where there is a space in the plastic guard i think this is what others have referred to though I have no issues there ( yet )
hey, do any of u notice the fox 40 bumpers dont really work after a couple ride? what do you suggest? thanks
ya my 40 bumpers broke after 1 crash, now my crown is hitting the lower weld on the headtube, i dont really know what you can do besides maybe run a non internal headset bottom cup,
Why dont u guys give the odi fork bumpers a go... Ive been using them for a lil while now and there great!
i'll give it a shot, ive got nothing to lose. hey f*ck it i'm already running a full odi kit with bars/stem/grips. one more to the collection
ya my 40 bumpers broke after 1 crash, now my crown is hitting the lower weld on the headtube, i dont really know what you can do besides maybe run a non internal headset bottom cup,
Why dont u guys give the odi fork bumpers a go... Ive been using them for a lil while now and there great!
i'll give it a shot, ive got nothing to lose. hey f*ck it i'm already running a full odi kit with bars/stem/grips. one more to the collection
i was running the odi bumpers on my boxxer and they broke but it is the easiest solution to your problem
Well, as mentioned it has been hot as hell and ive been pretty buisy...
SO, my bad on this one.... it seems that my B tension screw on the derailer had a loc tite failure and walked its way out thus causing the chain and derailer rub... ... I am feckin stoooopid lol, Fixed it by adjusting the b tension screw and using better and more loctite. I will have to keep an eye on this to see if it continues to Walk, but i doubt it.
Good you found the problem, could you still take a pic? I am curious to see what happened.
I can post one next time i break out the cam it's GF's as mine is busted right now and dont know where she keeps it lol, Its a pretty good chain rub after some point during 2 days resort riding, ( think lots of high gear pedaling resulting in deep scratch ) and has also now been painted to protect the frame, I am glad that it isnt a issue with spesh frame and my own dehydrated dumbass not putting 2 and 2 together after a long day. i do notice the potential for frame Chain rub ironically in the place where there is a space in the plastic guard i think this is what others have referred to though I have no issues there ( yet )
That's the spot I've always worried about. I have no idea how they are gonna run a smaller rear on them next year and not have any issues.
Post Message
Quote
... I am feckin stoooopid lol, Fixed it by adjusting the b tension screw and using better and more loctite. I will have to keep an eye on this to see if it continues to Walk, but i doubt it. 
but it is the easiest solution to your problem 
