Anyone here used a fox float 180mm lowered.to desired travel for dj?

PB Forum :: Dirt Jumping & Street
Anyone here used a fox float 180mm lowered.to desired travel for dj?
  • Next Page
Author Message
flag nathanfadera
Posted: Sep 7, 2014 at 5:05 Quote
LindLTaylor wrote:
You should have a red knob and a blue knob on the fork somewhere, probably near the top of the stanchions (the part that slides into the lowers). The blue one adjusts how much the fork resists compressing and should either say "compression" or "lockout". If it says compression, try fiddling with it to see if it helps any. For jumping you want it firm, anyway. I usually run my jump fork two "clicks" from locked out.

You should also make sure your rebound (red) isn't too open, or the suspension will push back really hard after you land (bounce you around a lot).

Oh alright. I have a high speed and low speed compression. No lock out since the fork is 180mm and design for freeride. Thanks for the advice. I have a new problem now... Seems to be losing air. When I open it up again ill add another 20mm spacer to bring it back down to 100mm and pump 120 psi and of course find out if air is really leaking out.

Thanks for the advice Smile
flag GrunderS
Posted: Sep 7, 2014 at 5:18 Quote
https://www.pinkbike.com/video/291244/ found this video, not sure if any use to you or not. Thought I'd share it anyway Smile
flag nathanfadera
Posted: Sep 7, 2014 at 5:46 Quote
GrunderS wrote:
https://www.pinkbike.com/video/291244/ found this video, not sure if any use to you or not. Thought I'd share it anyway Smile

Thanks man, will check it out Smile
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv42 0.011143
Mobile Version of Website