Sram X01 crankset (pf30) removal and re installation

PB Forum :: Mechanics' Lounge
Sram X01 crankset (pf30) removal and re installation
  • Previous Page
  • Next Page
Author Message
O+
Posted: Mar 26, 2015 at 0:14 Quote
Looking for advice on the removal and re installation of sram x01 pf30 crankset after breaking a crank.

Posted: Mar 26, 2015 at 15:50 Quote
If memory serves me correctly, there will be a weird looking bolt on the nondrive side crank arm. It will look like an 8mm hex sitting inside a 10mm hex. If that's what you see, just unscrew the 8mm bolt. The other 10mm part is a self extractor. The 8mm bolt will push against the extractor as you unscrew it and force the arm off of the spindle. Expect a little resistance as it comes off. Once the nondrive crank arm is off gently tap on the end of the spindle with the heel of your hand, a block of wood, or a soft faced mallet.


 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv42 0.007012
Mobile Version of Website