Go some 07/08 dirtjumper 1 now when I go to put my front wheel on the hub doesnt line up properly when I slide the axle in and tighten it all up the wheel is rubbing the inside of the fork leg its doing my head
are my forks bent or am I doing it wrong ? never had this problem before
Go some 07/08 dirtjumper 1 now when I go to put my front wheel on the hub doesnt line up properly when I slide the axle in and tighten it all up the wheel is rubbing the inside of the fork leg its doing my head
are my forks bent or am I doing it wrong ? never had this problem before
So you have a 20mm thru-axle setup?
On my Manitou Gold Label with a front Atomlab wheel, there seems to be slightly extra space, so that when tightened, the wheel does shift slightly to one side. Like maybe 3 to 4mm. But, it's not enough to make the tire rub.
So, I don't know what's going on with your wheel. Can you post a pic?
Unsecure image, only https images allowed: http://www.mtbr.com/images/Tradeshow/14/340/prodimg4.jpg
yh its a 20mm fork my front hub is a 20mm novatec.When i tighten to axle up it seems to pull the wheel to one side if you get what i mean.The wheel only seems to sit in the forks died straight when its not all done up