Hehe, good ol Marzocchi. I'm not an expert on those forks, but its possible its just an error on their part, or your internals were switched around at some point. I would try 155 in left, 10 in the right. Did you notice how much oil came out when you opened them up?
there's a lot of oil in both sides, definitely more than 10cc (10ml) and i'm pretty sure they didn't f*ck up putting the internals in the wrong sides haha. for now i've tried 155cc both sides and it seems to be okkkkkk time will tell
hi i need to change the oil in my 2006 888 vf i think they havnt had a oil change since new lol any ideas on how to take them apart and clean them and what WT oil i should use? im 127 lbs
loosen off the bottom bolts give the threads a knock with a rubber mallet, take the lowers off, drain the oil, clean with a cloth and a hose if you dry them properly.. then check the marzocchi website for oil volumes and weights
I'm sorry but I'm new to dh and I have the same.marzocchi forms. I just rebuilt the forks and was curious how much oil do u put in. I have everything. I just don't want to over or underfill