2005 Devinci Johnson i2i?

PB Forum :: Devinci

2005 Devinci Johnson i2i?

  • Previous Page
  • Next Page
Author Message
Posted: Dec 13, 2008 at 7:55 Quote
hey, i want tu change my rear shock on my devinci johnson 2005 but i dont know what is the spacing, so if you know what is the spacing, write here, and i want too change my crank but does it a 73mm 83mm. thank

Posted: Dec 13, 2008 at 8:04 Quote
balfa7 wrote:
hey, i want tu change my rear shock on my devinci johnson 2005 but i dont know what is the spacing, so if you know what is the spacing, write here, and i want too change my crank but does it a 73mm 83mm. thank
why don't you just go on the site... and see the eye to eye on the shock.. it should say, and find out what bb it has ? it should all be ther under specs.

Posted: Dec 13, 2008 at 8:06 Quote
boolmv wrote:
balfa7 wrote:
hey, i want tu change my rear shock on my devinci johnson 2005 but i dont know what is the spacing, so if you know what is the spacing, write here, and i want too change my crank but does it a 73mm 83mm. thank

why don't you just go on the site... and see the eye to eye on the shock.. it should say, and find out what bb it has ? it should all be ther under specs.
it dont have the spec and geo on the site

Posted: Dec 13, 2008 at 8:19 Quote
balfa7 wrote:
boolmv wrote:
balfa7 wrote:
hey, i want tu change my rear shock on my devinci johnson 2005 but i dont know what is the spacing, so if you know what is the spacing, write here, and i want too change my crank but does it a 73mm 83mm. thank

why don't you just go on the site... and see the eye to eye on the shock.. it should say, and find out what bb it has ? it should all be ther under specs.
it dont have the spec and geo on the site
ok then, well as for the shock, if you have a tape measure, take the shock off, and measure from the middle of one eye ( the part where you put the screw in ) to the other one and that's the length of the shock as for the width, i forgot what the tool was called... but there is one lol :p uhm, for your cranks, i'd go to your local bike shop, or if you have the tool to take them off, take them off and just read what the size is lol, hope that helps


Elio

Posted: Dec 13, 2008 at 16:32 Quote
nobody know?

Posted: Dec 13, 2008 at 16:36 Quote
you should call them up

Mod Plus
Posted: Dec 13, 2008 at 16:44 Quote
balfa7 wrote:
nobody know?
Perhaps if you used a proper thread title people would actually look at your thread?

Posted: Dec 13, 2008 at 21:46 Quote
9.5 x 3, and it's an 83mm bb.

  • Previous Page
  • Next Page

Copyright © 2000 - 2013. Pinkbike.com. All rights reserved.
dv43 0.015266