YT-Industries' bikes

PB Forum :: Downhill
YT-Industries' bikes
Author Message
flag mate1998
Posted: Jul 24, 2014 at 12:49 Quote
bobj wrote:
Here's a pic of it built, weighed in at 31.1lbs without pedals (size large)

My new yt wicked comp 650b. Stoked
gorgeus
flag mate1998
Posted: Jul 24, 2014 at 12:51 Quote
I need a new bearing set for my YT Tues 2011 frame. Can i order it from YT? Has anybody ordered bearings from them?
flag nkoone
O+
Posted: Jul 24, 2014 at 16:19 Quote
Meanwhile... somewhere in italia
photo
flag notphaedrus
Posted: Jul 24, 2014 at 22:43 Quote
nkoone wrote:
Meanwhile... somewhere in italia
photo

Looks more robust. ... far bigger contact for the hanger in rotation. Cool

Is this a prototype? or from yt?
flag orkusmg
Posted: Jul 24, 2014 at 23:32 Quote
notphaedrus wrote:
nkoone wrote:
Meanwhile... somewhere in italia
photo

Looks more robust. ... far bigger contact for the hanger in rotation. Cool

Is this a prototype? or from yt?

Does not look like hand made - carbon is nicely finished and rounded - although mech hanger seems like not the final version yet Wink - Straight out of CNC I meant, they had no time to paint it obviously Smile
flag cam77
Posted: Jul 25, 2014 at 0:54 Quote
mate1998 wrote:
I need a new bearing set for my YT Tues 2011 frame. Can i order it from YT? Has anybody ordered bearings from them?

You should be able to buy them individually from any good bearing supplier. Take them out of the frame and there should be a bearing ID number on each bearing. Use this number to order the correct bearing. Hope that helps.
flag dirch
Posted: Jul 25, 2014 at 2:09 Quote
mate1998 wrote:
I need a new bearing set for my YT Tues 2011 frame. Can i order it from YT? Has anybody ordered bearings from them?

Recently replaced bearings in a foes fly and giant glory. Just pop em out and take them to a shop dealing in bearings. The should be able to look at the code on them/ measure them up to find replacements.
flag jissse
Posted: Jul 25, 2014 at 2:14 Quote
I bought all bearings for my Stinky on internet, with the codes and a caliper it's really easy !
flag alheginbotham
Posted: Jul 25, 2014 at 4:28 Quote
orkusmg wrote:
notphaedrus wrote:
nkoone wrote:
Meanwhile... somewhere in italia
photo

Looks more robust. ... far bigger contact for the hanger in rotation. Cool

Is this a prototype? or from yt?

Does not look like hand made - carbon is nicely finished and rounded - although mech hanger seems like not the final version yet Wink - Straight out of CNC I meant, they had no time to paint it obviously Smile
problem solved, much larger contact lip aswell
flag mate1998
Posted: Jul 25, 2014 at 7:46 Quote
dirch wrote:
mate1998 wrote:
I need a new bearing set for my YT Tues 2011 frame. Can i order it from YT? Has anybody ordered bearings from them?

Recently replaced bearings in a foes fly and giant glory. Just pop em out and take them to a shop dealing in bearings. The should be able to look at the code on them/ measure them up to find replacements.
I have done that, and they said 2 of the 10 overall are special bearings and they can make it but it would cost 100eur to make that 2 bearings!!
flag kyte
Posted: Jul 25, 2014 at 9:01 Quote
alheginbotham wrote:
orkusmg wrote:
notphaedrus wrote:


Looks more robust. ... far bigger contact for the hanger in rotation. Cool

Is this a prototype? or from yt?

Does not look like hand made - carbon is nicely finished and rounded - although mech hanger seems like not the final version yet Wink - Straight out of CNC I meant, they had no time to paint it obviously Smile
problem solved, much larger contact lip aswell

Does anyone know if they'll sent new designed seat stay to everyone that alreadey have bought Capra's or just the ones that snap?
flag notphaedrus
Posted: Jul 25, 2014 at 10:07 Quote
kyte wrote:
alheginbotham wrote:
orkusmg wrote:


Does not look like hand made - carbon is nicely finished and rounded - although mech hanger seems like not the final version yet Wink - Straight out of CNC I meant, they had no time to paint it obviously Smile
problem solved, much larger contact lip aswell

Does anyone know if they'll sent new designed seat stay to everyone that alreadey have bought Capra's or just the ones that snap?

YT told me yesterday that the new seat stays aren't manufactured yet, will be 1 - 2 weeks. Dunno if this is only for the replacement ones, Has anyone got delivery of a Capra with one of these new hangers?
flag andie2247
Posted: Jul 27, 2014 at 2:35 Quote
what upgrades would you put on this, should come anytime after 11 august

http://www.yt-industries.com/shop/en/Bikes/Gravity/Tues2.0-green-2014?x6350b=9qtgfnkse1sa3b41a01duu6u36Unsecure image, only https images allowed: http://www.yt-industries.com/shop/en/Bikes/Gravity/Tues2.0-green-2014?x6350b=9qtgfnkse1sa3b41a01duu6u36
flag mikekay
Posted: Jul 27, 2014 at 3:54 Quote
andie2247 wrote:
what upgrades would you put on this, should come anytime after 11 august

http://www.yt-industries.com/shop/en/Bikes/Gravity/Tues2.0-green-2014?x6350b=9qtgfnkse1sa3b41a01duu6u36Unsecure image, only https images allowed: http://www.yt-industries.com/shop/en/Bikes/Gravity/Tues2.0-green-2014?x6350b=9qtgfnkse1sa3b41a01duu6u36

get rid of the E13 chain device and get an MRP
flag alparabraham
Posted: Jul 27, 2014 at 5:46 Quote
can't decide what to buy.A medium or large Tues?I am 180cm tall.Honestly I always had M sized frames but in this case can't decide.I have tryed a Large Tues ,felt a little bit long.But only a little bit.Anybody who ownes a Medium size could tell me the effective TT length from center to center?
Any help is welcome in the sizing question.
Otherwise the guys at YT told me that the Medium size is perfect for me.But I would like to ask the owners directly.
Thank you

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.015788
Mobile Version of Website