Infinite Adjustment!! – Futureproof HubsAfter several ideas were tested the final solution proved to be very simple. Inspired by the infinite adjustability of "
pump" trainers from Reebok we fitted an expanding air cylinder inside the hub. This cylinder allows the hub to be adjusted to fit all current and future width standards.
The Barometric Uni-Laterally Level Structured Horizontal Internal Tube (B.U.L.L.S.H.I.T.) forms the basis for our patented design. This unit is built into the central section of our iconic Pro2 hub and the user simply inflates it until the desired width is achieved. The hubs are designed to suit all frames from 130 to 200mm widths.
Inflated to a width of 200mm
One current restriction when using conventional spokes is that the wheel must be rebuilt if the hub width is altered, although we are also working on a new semi-elastic spoke which will allow for the widening of the flanges with changing spokes.
During the research we also discovered an additional benefit when installing this new hub. If the hub is inflated with helium we can also reduce to overall weight of the hub.
Sitting at a base width of 130mm
We see these new hubs as a genuine "
fix all" solution to the current minefield that surrounds bicycle frame design.
MENTIONS @hopetech
www.google.ca/search?q=Scurra+Hard+Enduro&source=lnms&tbm=isch&sa=X&ei=2bwbVf3VNMraoAS554DgAQ&ved=0CAgQ_AUoAg&biw=1366&bih=670#imgdii=_&imgrc=IDNmW0uVYn5ugM%253A%3Bm01_61pw4p9dSM%3Bhttp%253A%252F%252Fcdn.media.cyclingnews.com%252F2013%252F10%252F01%252F2%252Fscrurra_full_670.jpg%3Bhttp%253A%252F%252Fwww.cyclingnews.com%252Ffeatures%252Fgallery-interbike-2013-the-weird-and-wonderful%3B670%3B502
Making fun of the MTB industry is about as easy as making fun of religion, because the MTB industry is just about as stupid.
BOOST = Bunch Of Obvious Sales Tactics
Lets use the banana system !
Example : I cased it by three bananas
.
The entire Hope office brainstormed for 3 hours to come out with this
Now get me an adjustable rim so I could switch between 26 and 27,5 wheels with just couple of pump strokes
Nice AF Hope!
Thank you PB & Hope for keeping April fools fun for another year.
www.industrytap.com/shape-shifting-wheel-rolls-over-any-terrain/16691
Wait, can we do this with our tires also?
I realize the story is a joke.
But I am also mildly curious how much lighter a wheel would be if filled with helium? I assume not much.
And I assume since the mass of the components wouldn't actually change there would be no improvement in suspension response speed. But still, it's entertaining to wonder about.
p.s. I broke my hand... so I have nothing better to do than wonder about crap.
HOPEless