YT CF with Dorado Pros, hope V4 and now a Ti-spring from www.ti-springs.com :)
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
YT CF with Dorado Pros, hope V4 and now a Ti-spring from www.ti-springs.com :)
6 Comments
  • 1 0
 how long is the total length of the ti spring? longer than RS spring?

I wonder if it's just a short for the spring to be preloaded without the spring bearing or something.

and wonder if with spring bearing and ti spring on the shock and I can adjust the preload to just 1 turn without contacting cables under the rear shock. Even now with preload just 1 turn, cables are rubbed by the preload adjuster.
  • 1 0
 You could possibly put the bearing at the other end of the shock. I just put it at the top as that is normally where I see it. I think the spring was around the same size as the original -there isn't much difference in it if any. I know what you mean though, as I have the larger braided hope cables they do touch. But the standard non braided ones would be fine - I assume you have braided
  • 1 0
 How do you like the spring bearing??
  • 1 0
 It's working good, you can notice the initial stroke is so much smoother.
  • 1 0
 Would you recommend it??
  • 1 0
 It's not a big difference but I think it's worth it for the cost. If you're buying a Ti spring anyway it's just a little extra







Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.019681
Mobile Version of Website