a friend designed this on photoshop and asked me to post it up see what you lot thought of it i know it does need some improvement liek the shock needs to be lower on the down tube and needs to be different coz its a pull shock design comments welcome
  • - 1 props
flag mmmmmmsexualp1 (August 9, 2007 at 7:24) (Below Threshold) show comment
the pivot points are just above the bb half way along the down tube and at the top of the swing arm
[Reply]
  • + 0 props
flag cunning-stunt (August 9, 2007 at 7:30) (Below Threshold) show comment
The shock seems to be a bit in the firing line of debris from the front wheel in my opinion. Cant say much else, as i dont really have any expereince of building frames and what they need. But good luck to ur friend!
[Reply]
  • + 0 props
flag santacruz-dan (August 9, 2007 at 10:21) (Below Threshold) show comment
forks would hit the shock when compressed, and cant see the point in tht design, not very aerodiamic, for speed, looks like itd b rele heavy 2, try again m8
[Reply]
  • + 2 props
flag chaserider (August 9, 2007 at 12:30) (Below Threshold) show comment
It pretty much looks like shit...that about sums it all up really!
[Reply]
  • + 0 props
flag vineet (August 9, 2007 at 12:38) (Below Threshold) show comment
the front wheel + rear shock will be screwed. Put the rear shock on the inner side of the frame. And while making the next design attempt, also show the pivot points.
[Reply]
  • + 0 props
flag samfr1000 (August 9, 2007 at 16:30) (Below Threshold) show comment
the shock would be pulled on rather than pushed on when the rear end moves, and the forks would hit like everyone else has said
  • + 0 props
flag pipnet1 (August 10, 2007 at 5:17) (Below Threshold) show comment
which part of 'pull shock design' dont you understand? It would work but there is always a reason why something didnt catch on.
[Reply]
  • + 0 props
flag mmmmmmsexualp1 (August 10, 2007 at 3:43) (Below Threshold) show comment
i think its a very conclusive NO! lol
[Reply]
  • + 0 props
flag pete-roles-a-revell (August 10, 2007 at 13:57) (Below Threshold) show comment
that shock is gonna get covered in shit when u ride from the front wheel
[Reply]
  • + 0 props
flag matoryx (August 29, 2007 at 4:41) (Below Threshold) show comment
that biike is fugly you forgot the chain you dum ass!
  • + 0 props
flag wdja1 (September 17, 2007 at 11:09) (Below Threshold) show comment
youre fat
[Reply]
  • + 0 props
flag dmandare (December 10, 2007 at 17:31) (Below Threshold) show comment
put a fox dhx 5.0 that would look cool!
[Reply]
  • + 0 props
flag tom777 (December 12, 2007 at 10:29) (Below Threshold) show comment
that would pull the shock out it wouldnt work
[Reply]
  • + 0 props
flag mmmmmmsexualp1 (December 12, 2007 at 11:26) (Below Threshold) show comment
can you not read?? and have you never heard of pull shocks?
[Reply]

Post A New Comment
Bold Italic Link

Barnsley, United Kingdom

1177 views | 14 comments | 0 faves


Trail: none
Riders: none
Description: a friend designed this on photoshop and asked me to post it up see what you lot thought of it i know it does need some improvement liek the shock needs to be lower on the down tube and needs to be different coz its a pull shock design comments welcome
Add to my Favorites
Make my Pod