Glowing rotor.
  • + 4 props
flag sherbet (February 4, 2008 at 19:22) (Below Threshold) show comment
That's hot.
  • + 2 props
flag torrentsarethetits (May 23, 2008 at 11:45) (Below Threshold) show comment
this how you run in all your brakes??? haha
  • + 0 props
flag troyburgundy (February 4, 2008 at 19:23) (Below Threshold) show comment
WOAH
  • + 0 props
flag bmxer4852 (February 4, 2008 at 19:28) (Below Threshold) show comment
kewlll
  • + 0 props
flag ilikemybike011 (February 4, 2008 at 19:36) (Below Threshold) show comment
is that the new hayes caliper by any chance?
  • - 6 props
flag frdh (February 6, 2008 at 18:24) (Below Threshold) show comment
so dumb so dumb...
  • + 0 props
flag ilikemybike011 (February 16, 2008 at 10:40) (Below Threshold) show comment
my bad... similar....
  • + 0 props
flag ilikemybike011 (February 16, 2008 at 10:40) (Below Threshold) show comment
http://www.sicklines.com/gallery/data/534/hayes_prototype_4piston.jpg
  • + 0 props
flag srobinson (February 4, 2008 at 19:38) (Below Threshold) show comment
Thanks man, thats awosme
  • + 2 props
flag PedalUpBombDown (February 4, 2008 at 19:39) (Below Threshold) show comment
ilikemybike011, i'm not sure. I couldn't find any info as to what brake it was but if you ask me it looks like a mutated Magura Gustav.
  • - 2 props
flag glennwithap2 (February 5, 2008 at 3:43) (Below Threshold) show comment
DUUH its a hope mono m4..
  • + 0 props
flag runner (February 5, 2008 at 11:14) (Below Threshold) show comment
woah
  • + 0 props
flag banshee-ripper (February 5, 2008 at 11:49) (Below Threshold) show comment
That is defantly a HOPE caliper. Man, they realy put that rotor to the test!
  • + 0 props
flag Pitcrew (February 5, 2008 at 14:32) (Below Threshold) show comment
"hmmm, i wonder if i stick my finger in there.....o, never mind..."

Thats pretty cool though, hate to see a real world condition to make a rotor glow like that.
  • + 9 props
flag bsmith (February 10, 2008 at 20:58) (Below Threshold) show comment
put a xc rider on a dh bike and thats what you will get.
  • + 0 props
flag Whoinventeduphill (May 23, 2008 at 18:50) (Below Threshold) show comment
hah!!
  • + 1 props
flag PedalUpBombDown (February 5, 2008 at 14:36) (Below Threshold) show comment
Pitcrew, "hmmm, i wonder if i stick my finger in there.....o, never mind...", DO IT DO IT DO IT!!!! NOW NOW NOW!!! it'll be cool, trust me...
  • + 1 props
flag Pitcrew (February 5, 2008 at 15:45) (Below Threshold) show comment
id like to keep my fingers, but i bet i could cauderize the cut if i did...
  • - 1 props
flag slopes0and0style (February 5, 2008 at 14:37) (Below Threshold) show comment
obvs its hope ...
  • + 1 props
flag PedalUpBombDown (February 5, 2008 at 14:38) (Below Threshold) show comment
slopes0and0style, that's been established, thanks.
  • + 0 props
flag codyloveskona (February 8, 2008 at 20:32) (Below Threshold) show comment
bet the braking power uck onces it that hot, but they use a diffrent piston matirial phenolic to keep the heat from the caliper
  • + 0 props
flag jackariusjones (February 8, 2008 at 20:42) (Below Threshold) show comment
i wonder if i could do that with an old rotor on a motor and a mono mini caliper ...hmmmm.........

good pic thoo
  • + 1 props
flag dhpete93 (February 9, 2008 at 12:17) (Below Threshold) show comment
dude! the things sparking lol
  • + 0 props
flag xxburton4lifexx (February 9, 2008 at 15:52) (Below Threshold) show comment
THATS HOT!
  • + 0 props
flag dmandare (February 10, 2008 at 18:19) (Below Threshold) show comment
talk about a waste of pads LOL
  • + 6 props
flag kamil23 (February 12, 2008 at 12:18) (Below Threshold) show comment
A companies reputation is worth a lot more than those pads.
  • + 0 props
flag scottiskingdingeling (February 11, 2008 at 1:36) (Below Threshold) show comment
hehe thats hot!!
  • + 0 props
flag lexx (February 15, 2008 at 21:59) (Below Threshold) show comment
is it just me or does it look like its just held up by a big ass paper clip? xD
  • - 1 props
flag cooldudethatate (February 16, 2008 at 14:21) (Below Threshold) show comment
Well i stuck my finger into a normal bike wheel and that cut it stight off so i guess if that cut it off i wouldnt even find it it would fly so far.
  • + 0 props
flag sgsrider (February 17, 2008 at 15:30) (Below Threshold) show comment
true world testing...those are some hot rotors...
  • + 0 props
flag dancallahan (February 22, 2008 at 20:47) (Below Threshold) show comment
pod
  • + 0 props
flag doubledeuce (March 27, 2008 at 7:01) (Below Threshold) show comment
wow...reminds me of those photos u see of F1 cars braking...looks cool.
  • + 0 props
flag 40s4life (April 16, 2008 at 9:22) (Below Threshold) show comment
ya thats def a hope m4
thats wat i got on my bike
there so sik
  • + 0 props
flag 40s4life (April 16, 2008 at 9:22) (Below Threshold) show comment
and thats the hope rotor also
haha i have them 2
  • + 0 props
flag corvettehater (May 13, 2008 at 14:05) (Below Threshold) show comment
yea, thats like everyday for me (sarcasm)
  • + 1 props
flag wonderworks (May 21, 2008 at 1:04) (Below Threshold) show comment
Hope M4 ? looks just like mine ,
  • + 0 props
flag rider3000 (May 28, 2008 at 18:48) (Below Threshold) show comment
tats scarry hot!
  • + 1 props
flag Phelix (July 17, 2008 at 11:10) (Below Threshold) show comment
put the finger!!!!!!come on!!!!!!!!

Post A New Comment
Bold Italic Link

flag Stowe, Vermont, United States

1477 views | 38 comments | 89 faves


Trail: None
Riders: None
Description: Glowing rotor.
Add to my Favorites
Make my Pod