why is there a big gap between your crank and bb.

right take out your bb and install one black spacer on none drive side and 2 on the drive side and reinstall your bb.

then you want the 3.5mm preload elastomer,located in the recess of your none drive side crank with 3 white spacers and 1 thin black spacer on the none drive side.

for the drive side you want the thin red spacer 1 white spacer and 1 black thin spacer on the drive side.

then black spacers butt up against the bb.

sorry thin black spacers butt up against the bb.

your bike is so sweet now, I cant afford any new parts atm.

oh and nice socks =)