Red Bull - Macaskill Conquers at Edinburgh in Edinburgh, Scotland - photo by cloverleaf

Photos from Macaskill Conquers in Edinburgh on 20.02.2011

View Who Faved this

28 Comments

Score Time

callumsmyth (Feb 23, 2011 at 14:14)

░░░░░░░░░░░░░░░░░░░
░█▀▀ ░█▀█ ░█ ░█▀▀ ░
░█▀▀ ░█▀▀ ░█ ░█ ░░░
░▀▀▀ ░▀ ░░░▀ ░▀▀▀ ░
░░░░░░░░░░░░░░░░░░

[Reply]

devulge96 (Feb 21, 2011 at 12:49)

Hmm, I can't think who's this is... Razz

[Reply]

devulge96 (Feb 21, 2011 at 12:49)

Hmm, I can't think who's this is... Razz

[Reply]

kipmtb12345 (Mar 5, 2011 at 2:54)

i had the prototype bars on my commencal never released ones like those but the dh ones

[Reply]

woodsroller Plus (Feb 22, 2011 at 13:43)

Are these 24" or 26" wheels?

fooby (Feb 22, 2011 at 15:29)

24". Is the bent tubing supposed to be like that? Haven't seen it before.

woodsroller Plus (Feb 27, 2011 at 10:47)

Thanks. I'm sure the tubing is meant to be bent like that. I have had a few hardtails with bent tubing on the seat stays and chain stays. Azonic Steelheads have similar curves, which I think help contribute to them having a lot of tire-width clearance.

ninjatarian (Sep 24, 2011 at 22:09)

Curved seat and chain stays are pretty typical. Suprised you havent seen it before.

[Reply]

Erikturner (Feb 23, 2011 at 18:02)

DANNY MACASKILL'S BIKE IS F*CKING SICK

[Reply]

ninerider1 (Feb 22, 2011 at 6:27)

OMG ! danny should have hes own signature frame kit Wink

Milo123 (Feb 22, 2011 at 7:08)

he basically does with this frame, there is loads of prototype stuff on it

highvoltagefr (Feb 22, 2011 at 10:00)

Such as? All this stuff has been released ( except the hope colour but there same as normal) but te geo may be different.

Milo123 (Feb 22, 2011 at 10:21)

the frame, if you read the actual report on the bike he says it himself

highvoltagefr (Feb 22, 2011 at 12:54)

That's why I said the geo may be different, I can't listen tHe audios or watch videos as apple are too cheap and shit to purchase rights for flash on I devices.

Milo123 (Feb 22, 2011 at 13:01)

well it has 12mm dropouts on the rear and a fork with 20mm dropout proberly a few other secret stuff, he said its gonna be his signiture frame called a Skye which will be interesting

highvoltagefr (Feb 22, 2011 at 13:05)

I have seen both of then on dirt/street/trials frames in the past, te 20mm bolts better than an axle as it's alot lighter yet still strong and same with 12mm rear bit stronger than 10 but still light

Milo123 (Feb 22, 2011 at 13:07)

yeh its alot better for his riding as he is pretty aggressive with his riding compared to most riders on standard fourplays

ninerider1 (Feb 23, 2011 at 6:11)

i think that he should run rim brakes on the rear it is much better for trial riding the brake responds much faster then disc brakes Smile

Milo123 (Feb 23, 2011 at 13:20)

He did run a magura but he is proberly just experimenting with different ones, discs are alot better in the wet so its alot better for him living in scotland

ninerider1 (Feb 24, 2011 at 3:11)

yes i heard that on the interwiew Smile

[Reply]

lukerb (Feb 22, 2011 at 2:12)

hope hubs and atomlab rims

[Reply]

freerider-max (Feb 21, 2011 at 13:28)

i want it dude!

SIMPS0N (Apr 28, 2011 at 2:53)

ill give it to you ;P my name asamad i will give you a little extra on the side wink wink

[Reply]

mossyriders (Feb 22, 2011 at 2:04)

NICE

[Reply]

kinetic-uk Plus (Feb 22, 2011 at 1:37)

Lovely bike.

[Reply]

Noriaki (Feb 23, 2011 at 1:58)

Coooool!24"bike!

[Reply]

flamerith (Feb 22, 2011 at 0:58)

what wheels are those

xcdan (Feb 22, 2011 at 9:35)

new atomlab pimp rims (y)

[Reply]