thanks dude ! the lid was sort of coincidence.. i cracked the nose of my fox rampage lid 3 weeks before.. and since i was shopping for a new one. i might as well picked a matching one i must note .. black helmets are a lot warmer to wear in sunshine than silver ones.. but it is lighter than te rampage.. and that saves your neck muscles a lot all i need to do know is fit the new tech levers i bought and pimped and give the bike a good bashing
Good stuff.top tip with bleeding hope brakes .after bleeding them turn the bit point control out then put a bottle with dot 4 in on the bleed nipple sqweez more oil in then lock off bleed niple.then turn bit point control in bit by bit until pads are just touching the disk.i was not happy with my hopes did this and they are now super powerfull.and i can now run the levers closer into the bars not hiting my finger.hope this is helpfull to you
hahaha nice one.. i bleed the reverse.. so i pump the oil allready from the caliper up.. after bleeding i push the pistons out the bite point contr. is good of you te mention.. i forgot that with moto levers.. and it does indeed make a difference, ! will recon with that with these aswell ! now for the tech boys.. there is an extra blanking plug inside the lever bar clamp with a alu pin going into the reservoir. if you cut this down you would have more room for oil in there,, > good idea ? i mailed hope and they said it was made for bleeding during production of them.. we dont need to use it ever ?
my forks are painted now.. The seat post is usefull and the cables match the little white what's on the bike... And looking at your green pedals and grips you are not the one to comment
Rotterdam, Netherlands 
superbikes
(Sep 2, 2011 at 2:54)
nice bike
