Photo 8 - The inner diameter of the lower race is tapered in one side to mate with the fork's crown race fitting. Make sure that the taper faces down and slide the lower bearing onto the fork's steerer tube.
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Photo 8 - The inner diameter of the lower race is tapered in one side to mate with the fork's crown race fitting. Make sure that the taper faces down and slide the lower bearing onto the fork's steerer tube.
1 Comment
  • 1 0
 I think its the other way - the tapered side of the bearing faces up into the headset cup. The flat side with the gasket faces the crown race on the fork







Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv42 0.368473
Mobile Version of Website