MmmBones

It's like a finger pointing to the moon. Don't concentrate on the finger or you'll miss all that heavenly glory

Block user

Recent

MmmBones mikelevy's article
Aug 25, 2016 at 14:34
Aug 25, 2016
Rocky Mountain's 2017 Slayer - First Ride
With zero bb drop in the high setting, a 26" x 2.5" tire would give it about a 340mm BB height, in case anyone was wondering.
MmmBones RichardCunningham's article
Aug 21, 2016 at 15:48
Aug 21, 2016
Hope's HB.211 Enduro Racer Nears Production - Whistler Crankworx 2016
Check out the link to the older article. It explains the benefits to the change in greater detail than this one. Basically it's a standard 135/142 hub shell but with different reducers to make the flanges symmetrical for even spoke tension, thus a stronger wheel. The brake/mount spacing is also proprietary to keep the rear end slim. They bumped up to a 14mm axle because that's the inner dimension of the bearings the rear hub already used, so the axle no longer requires a spacer between them.
MmmBones RichardCunningham's article
Aug 20, 2016 at 15:48
Aug 20, 2016
Five Ten Hellcat and Freerider Pro - Crankworx Whistler 2016
How to get the most out of five-tens: Don't sit near a campfire. Don't leave them in a hot car or direct sunlight for extended durations. Buy them off of the Five Ten Closeout website at the end of the year when they are 1/3 the cost. If something starts failing prematurely, warranty them.
MmmBones RichardCunningham's article
Aug 19, 2016 at 3:39
Aug 19, 2016
Leatt Convertible Full Face Helmet - Crankworx Whistler 2016
@Mattin: that's incorrect, only the chinbar is ASTM 1952 certified. The helmet is not, as stated in the article- "Enduro 3.0 helmets are not certified to Downhill standards."
MmmBones mikekazimer's article
Aug 19, 2016 at 3:18
Aug 19, 2016
Trek Slash 29 - First Ride: Crankworx Whistler 2016
@ThomDawson: I seentit but it looked like a regular 27.5b that had an angle grinder taken to it.
MmmBones RichardCunningham's article
Aug 19, 2016 at 3:13
Aug 19, 2016
Leatt Convertible Full Face Helmet - Crankworx Whistler 2016
@murfio: no one asked about your homoerotic fantasies.
MmmBones RichardCunningham's article
Aug 19, 2016 at 3:09
Aug 19, 2016
Leatt Convertible Full Face Helmet - Crankworx Whistler 2016
that's only for the chinbar. "Enduro 3.0 helmets are not certified to Downhill standards."
MmmBones RichardCunningham's article
Aug 19, 2016 at 3:00
Aug 19, 2016
Leatt Convertible Full Face Helmet - Crankworx Whistler 2016
@poah: Only the Chinbar passes ASTM-1952. The whole entire D3 passes ya jackass... "Enduro 3.0 helmets are not certified to Downhill standards." I know exactly who this helmet is "targeted too", idiots like you!
MmmBones mikekazimer's article
Aug 19, 2016 at 1:17
Aug 19, 2016
Trek Slash 29 - First Ride: Crankworx Whistler 2016
@ThomDawson:That would be soooo sick, but It's gotta fit a 29" wheel. Jr T with the arch removed?
MmmBones RichardCunningham's article
Aug 19, 2016 at 1:15
Aug 19, 2016
Leatt Convertible Full Face Helmet - Crankworx Whistler 2016
Oh look, another non-DH certified wanna be full face that has questionable aesthetics. No thank you.
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2016. Pinkbike.com. All rights reserved.
dv65 0.053627
Mobile Version of Website