RealC

Very little use, great condition as shown in photos. Nukeproof Superlight 400lb / 70N spring. Happy to sell without spring if not needed, please make an offer. Postage within UK only, or collection from Sheffield. Paypal accepted, please include fees.

Good condition, hardly used. Bottom bracket installation tool for E13 external threaded bottom brackets. Can be tighten with a hex key or standard BB wrench.

Mondraker Summum downhill bike. Custom build so most parts are newer than the frame. Forks serviced with new bushings and Enduro seals. Upgraded original Fox DHX shock to newer Marzocchi Moto C2R, which has a K9 Industries 325lb race steel spring and thrust bearing. Other specs listed below. Various cosmetic marks, but not affecting performance. Stored in a dry shed when not in use. Frame 2010 Mondraker Summum Medium Shock 2014 Marzocchi Moto C2R Fork 2012 Marzocchi 888 RC3 Cranks E13 LG1+ and E13 SRS chainguide Rear mech Shimano Zee Shifter Shimano Zee Wheels Superstar DH 595 26" Brakes Avid Elixir R Bars Answer Pro Taper Stem Nukeproof Sam Hill Direct Mount Grips DMR Deathgrip Tyres Schwalbe Wicked Will Saddle Madison Prime Pedals Shimano DX Please just ask if you have any questions or want photos of anything in particular.

2009 Iron Horse Sunday WC Frame and Shock Frame has been re-anodized in black, this means it's more difficult to scratch than the average re-spray job. Some cosmetic damage such as cable rub and chain wear on the chainstay (both shown in photos). But importantly, no cracks or large dents. The frame looks good for its age and still rides nicely. Pivot bearings mostly good, I have just replaced two bearings and greased some others which were less worn so that the linkage moves smoothly. There is a 0.5mm plastic shim in the lower link to remove play (common Sunday issue). With this shim installed there is no issues when riding. The frameset comes with: Fox DHX 5.0 PUSHed shock (241x76mm / 9.5x3") with: - K9 Race-Steel spring (325lb x 3") - K9 thrust bearing (slightly increased small bump sensitivity) Works components -2degree angle headset. RRP £75. - Changes the Sunday head angle to 63 degrees and lengthens the wheelbase slightly. This brings the geometry closer to more recent downhill bikes. The bike is more stable on fast steep tracks. Rear axle (12x150mm) NC-17 30.0mm seatpost and clamp Spares included: mech hanger, lower linkage bolts and seatpost reducer shim. Price includes postage within UK. Any questions or want any more photos just ask. Collection from Nottingam or Bristol also welcome.