Stathamt

Hi, I have rebuilt my Marzocchi Roco Lo Air Shock (200*57 2014) and I need this particular [air adapter](https://bicyclesuspension.de/products/marzocchi-8501686-r-tool-roco-air-inflate-adapter-hi-pres). As you can see from the link, these are rather expensive. I actually bought the shock for less than this adapter! Does anyone have one of these lying around I could purchase? FYI, I'm based in the UK but happy to pay for shipping. Thanks, Tom.

Hi, I am selling my Saracen Team Myst Pro (2016) Downhill Bike, Large frame - Location is Bristol not Cheshire Due to injury, the bike has not been ridden since March 2018, hence why the most parts are listed as being serviced/replaced late 2017. The reason why it is for sale is because it is no longer in use. In 2018, I used the bike less than a handful of times and zero times this year, hence the sale. As you can see from the spec description, a lot of the parts were replaced in September 2017 and since then has not been ridden much. Fantastic bike, well balanced and you'll feel at home straight away. The bike has been well looked after and being a downhill bike, also well used (but in a good sense, I am a smooth rider). Annoyingly, there is a dent in the downtube from a rock flying up (see pictures). Amazingly, the impact went through the rockguardz carbon bash guard, so I now question how appropriate these are and whether the guard directed the force of the rock somehow to a specific area. Either way, I was not happy as I have tried my hardest to keep the bike in good condition. I protected the frame with minimum clear plastic coating. I rushed taking off the bottom part near the crankset and a bit of paint came off (as pictured). Spec description: Frame Components: * Frame: Saracen Myst Pro (2016/17) - rear triangle replaced under warranty (September 2017) due to the glue resin that holds the metal inserts coming loose. Frame bearings very good, replaced at the same time as the replacement rear triangle. * Headset: FSA stock headset, bearings feel good (September 2017) * Derallieur hanger: The current hanger is gauged by the derailleur bolt itself, I'd recommend replacing this ASAP for super slick shifting. Shifting is ok and works but not 100% crisp. * Bashguard - Frame has a lower Rockguards carbon fibre bash guard Suspension Components: * Shock - Cane Creek DB Coil, with titanium spring (https://www.ti-springs.com/) - 425. Cane creek upgraded with WSS Bladder Upgrade from Sprung Suspension - https://www.sprungsuspension.com/fork-and-shock-upgrades/cane-creek-upgrades/ * Forks - Rockshox Boxxer team forks (2017) - lower leg and seal change (28/06/2019). Stanchions good condition, quite a few scuffs on the lowers. Cockpit Components: * Stem - Superstar 50mm - purple * Handlebars - Renthal Fatbars (760mm) - few scuffs * Grips - DMR Deathgrips - gum (thin) - the ends of these grips have a habit of getting tears. * Saddle - Pro saddle - the rails are bent and there is a tear in the saddle - for DH this is not a problem * Seat post - Kore - original * Seat clamp - Kore - original Drivechain Components: Bottom bracket - Shimano zee, very good condition (replaced September 2017) * Crankset - Shimano zee, good condition apart from the paint rub. * Chainring - Shimano zee, very good condition (replaced September 2017) * Derailleur - Shimano zee derailleur - plastic switch for clutch has come off but clutch still works * Shifter - Shimano zee Brakes: * Brakes - Shimano zee (fr&rear), brake pads Shimano (metal) excellent condition. Rear calliper replaced (06/2018) due to leakly piston. Brakes bled, ready to go. Levers have scuffs. Wheels: Wheels (handbuilt - tubeless ready): Stans Flow EX Rims 27.5, Hope pro 2 evo (Front - black), Hope Pro 2 evo (Rear - Silver), DT Swiss Comp Spokes, DT Swiss valves, stans sealant. Wheels ding free but cosmetic scratches & relatively true (more so the front than rear as used expect). Tyres: Schwable Dity Dan Front & Maxxis High Roller Rear - both very good condition Final points Please note, the pedals shown in the pictures are not included. I have receipts for the bike and probably most parts if requested. I would prefer a local collection and I recommend a viewing if possible. Nevertheless, I will post the bike with recorded delivery (UK mainland only). I have listed all known faults and service history as possible. If you have any questions, please don't hesitate to ask. Thanks, Tom.