Block user

Recent

Added 11 photos to Buysell
Aug 10, 2021 at 12:49
Aug 10, 2021
Selling
Aug 10, 2021 at 12:47
Aug 10, 2021

GT Force Pro Carbon M (2020 Build Kit)

$3600 CAD
2019 Frame built on brand new 2020 build kit last August. Well taken care of, low hours, never raced. CRANKS NOT AS PICTURED, see below. Build: Fork: MRP Ribbon 170mm Shock: FOX DPX2 Brakes: SRAM Code RSC Drivetrain: SRAM XO Cranks: RaceFace Turbine Cinch Wheelset: Spank 350 (Rear has Cushcore and a few dings but is true, Front has a HuckNoris protector) Dropper: SRAM Reverb 150mm Stem: Spank Bars: Chromag OSX 35mm Tires: Front - Assegai EXO (80%), Rear - Aggressor DD (60%) The seat and grips may be different than pictured, Does not include pedals. Remote buyers pay to ship.

Selling
Jun 18, 2020 at 14:03
Jun 18, 2020

Devinci Spartan Carbon - Large *UPDATED*

$3200 CAD
2016 Devinci Spartan Carbon - Large, 165mm rear travel, frame 3M wrapped after first year. Meticulously maintained by the owner and Cycology Bikes Castlegar. 31.0 lbs without pedals. Fork: Mrp Stage 170mm (rebuilds: damper 2019, air spring & lowers & lower seals 2020) Shock: Rockshox Monarch RC3 Plus Debonair (rebuilds: damper 2018, aircan 2019, aircan rebuild kit included) Brakes: Guide RSC levers on Code calipers (pads: rear 100%, front 50%) Dropper: Rockshox Reverb Stealth (new 2018 updated model) Shifter and Derailer: Sram GX 11sp (shifter original, derailer new late 2019, cable and housing 2019) Cassette: e13 TRS+ 9-44 (new 2018, new chain 2020) Cranks: Raceface Turbine Cinch Chainring: OneUp 30t oval Rims: Spank Oozy 295 (front), 345 (rear) Hubs: Hope Pro 2 EVO Tires: rear: Minion DHF EXO 3C, rear: Aggressor DD 3C (worn) Bars: Chromag Fubar 35mm (new 2019) Stem: V2 Pro aluminum, 35mm clamp Seat: Prologo KIII (worn) Pedals not included

Added 12 photos to 2014-Intense-M9
Feb 18, 2017 at 11:07
Feb 18, 2017
Added 5 photos to 2016-Felt-Compulsion10
Jan 27, 2017 at 14:33
Jan 27, 2017
Selling
Jan 27, 2017 at 14:32
Jan 27, 2017

Felt Compulsion 10 - Under 29lbs - Large

$3500 CAD
Bike is in amazing shape, was rode all summer on different wheels and then frame was warrantied in the fall, so this frame and these wheels only have about 5 rides on them. Bike shows very little wear and the frame is 3m wrapped. Cranks were upgraded, tires setup tubeless, fork has been serviced and chain is brand new. This is by far the most capable all-mountain bike I have rode. It climbs like a trail bike and descends like a champ. Weighs under 29lbs without pedals. Spec: SHOCK: Rockshox Monarch RC3 Plus Debonair (160mm Travel) FORK: Rochshox Pike RC3 Dual Position Air 160mm CRANKS: Raceface Turbine Cinch 175mm w/ 30T Chainring SHIFTER: SRAM X01 11-speed DERAILER: SRAM X01 11-speed CASSETTE: SRAM XG-1180 BRAKES: SRAM Guide R WHEELS: WTB KOM i23 on Novatec Hubs SEATPOST: KS Lev Integra 125mm STEM: Felt MTB Ø31.8mm BARS: Felt MTB carbon Flat top Ø31.8mm

Added 4 photos to 2014-Intense-M9
Jan 27, 2017 at 14:08
Jan 27, 2017
Selling
Jan 27, 2017 at 14:06
Jan 27, 2017

Intense M9 FRO

$2700 CAD
Bike is in great shape and has been well maintained. Frame was brand new in 2015 and was ridden that summer, secondary to my enduro bike, around 5 park days and maybe 5 local days. Bike was not ridden at all in 2016. Lots of new kit on it with very low hours. Selling because I don't ride DH anymore. Specs: FRAME: 2014 Intense M9 FRO Size M SHOCK: FOX RC4 Kashima 450 & 400lbs Springs FORK: 2015 Marzocchi 380 C2R2 SHIFTER: Zee DERAILER: Zee CRANKS: SRAM Truvativ Holzfeller 36T 165mm BRAKES: Avid Code HUBS: Novatec RIMS: Mavic EX823 (rear) Transion Revolution 32mm (Front) BARS: Easton Havoc 35mm STEM: Easton Havoc PEDALS: Straightline Defacto w/ Terror Pins RUBBER: Maxxis Minion DHR II 3C DH Casing (front) Maxxis High Roller II 70a DH Casing

Selling
Apr 13, 2016 at 9:39
Apr 13, 2016

Kona Process 153 DL Custom - Medium

$3500 CAD
2015 Kona Process 153 DL built from the frame up last season. Love this bike, its a shredder. Cranks, wheels and rotors are not as pictured. Bike is located at Cycology bike shop in Castlegar while I'm away working. BUILD: FORK: Manitou Mattoc Pro 160mm SHOCK: Rockshox Monarch Plus RC3 BRAKES: Sram Guide RS ROTORS: 180mm Shimano XT icetech BARS: Kore Mega cut to 740mm STEM: Kona 40mm GRIPS: Kona Factory SEATPOST: Rockshox Reverb Stealth 150mm SEAT: WTB Volt (worn) CRANKS: Raceface Turbine CHAINRING: Raceface 32t 1x10sp CASSETTE: XTR M980 with ONEup 11-42t DERAILER: Shimano XT 10sp SHIFTER: Shimano Zee 10sp RIMS: WTB sx23 HUBS: Shimano deore TIRES: Schwable Hans Dampf (Brand new) and Maxxis Ardent Currently setup tubeless. Bike is in good condition; fork just serviced, shock factory serviced this winter, seatpost rebuilt last fall, brakes just bled. Small scratch on seatpost, and one scratch on fork stantion that required filler but is smooth and works as new. Otherwise usual scuffs and scratches from one season of riding. Needs a new seat soon. Pedals not included.

Added 9 photos to 2015-Kona-Process-153
Apr 13, 2016 at 9:18
Apr 13, 2016
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.033918
Mobile Version of Website