Added 6 photos to mech-and-shifter
Nov 6, 2014 at 17:10Nov 6, 2014
Nov 6, 2014 at 17:05Nov 6, 2014
Shimano M820 Saint 10 speed shifter and Shimano M820 Saint M820 Shadow+ mech. Mech and shifter were bought at the end of December last year and were hardly used. They were last used in May. Mech comes with Hope red jockey wheels and the brand new jockey wheels, which were taken off the moment i got it. The shifter is the I-Spec B mount, so will mount onto shimano saint brake levers, or hope brakes with a matchmaker (check my other adverts for a set of hopes with the matchmaker...) I'll also include a fairly new inner and outer gear cable which is 54inch long. The I-spec bolts are included, even tho they aren't in the pictures.
Added 3 photos to forks
Nov 6, 2014 at 16:51Nov 6, 2014
Added 7 photos to Cranks
Nov 6, 2014 at 16:31Nov 6, 2014
Nov 6, 2014 at 16:29Nov 6, 2014
Hope 'stelath' V4 brakes with Tech 2 levers. Both front and rear brakes. Come with braided hoses and ALL ti bolts. Front caliper is fitted with superstar kevlar pads and rear has hope standard pads. Front has a 203mm floating rotor with mount to fit with a 30inch hose. Rear has a 183mm floating rotor with mount to fit with a 50inch hose. The levers and callipers are in excellent condition. The front hose is good, with only a couple marks on the outer protective sleeve. The rear has 1 small part that has rubbed though the protevice sleeve and the braided line. There are no leaks from this section. This was caused by a slack line rubbing on my rear wheel. I used tape and pulled it tighter and had no problems. Also included is 3 brand new sets hope stand pads and 2 brand new sets of superstar kevlar pads and a spares pack to allow the change or shortening of hoses. Unfortunately, i have lost 1 of the small C-clamps for the levers. I was using a matchmaker onto a saint shifter. The matcher maker clamp for shimano shifters and matchmaker clamp for avid shifters is included in the sale. A new C-Clamp is £9 from CRC
Nov 6, 2014 at 16:27Nov 6, 2014
Sram X0 crank set. PF30 axle (will fit specialized demo etc). Cranks are 165mm. Cranks have always had protective stickers fitted so have very little crank rub. Crank ends have some strike marks, but no massive gauges or cracks. The OEM clear protective sticker has started to peel, but with new crank covers or removing this will fix it. I'll also include a renthal 36t ring. These cranks are extremely light, but extremely stiff and strong. BB is NOT included.
Added 6 photos to forks
Nov 6, 2014 at 13:50Nov 6, 2014
Nov 6, 2014 at 13:43Nov 6, 2014
Rockshox 2014 26" R2C2 Bought in October 2013 and only used a handfull of times. Not used since May. Were bought From J-Tech suspension and turned for an 80kg rider. The forks were fitted and an InvisFrame kit before fitting, so are pretty mint. Have always been looked after, with seals and stantions being kept clean. Stantion lube always used to help keep the seals soft. Come fitted with the 'heavy' spring and will also come with a spare medium spring. Comes with a unused service parks (seals). Only include the flat top crown. Also has starnut fit nut and will come with hope spacers and a head doctor top cap. Steerer is 150mm (was on a medium Demo S-works). Stantions have no marks. lowers only have 1 mark on the drive side, it has taken some paint, but purely cosmetic.
Added 2 photos
Oct 13, 2014 at 13:20Oct 13, 2014
Photo by skawt-1