benburns1

Up for sale is my 97 YZ 250 with green sticker through June 2023. Don't ride it that much so it's time to part ways. Title in hand. $2000 Firm Lowered rear suspension, so good for shorter riders. Less than 20hrs: New plastics New seat wrap New tires Chain, sprocket & chainwheel Front & rear chain guides Glass pack Spoke covers Hour meter Brake pads Grips and handlebar pad Swingarm and linkage bearings cleaned and repacked Sparkplug Carb rebuild The Bad: Pipe has a few cracks in it. Will eventually need to be replaced or welded Shift lever is a little stripped. Will eventually need to be replaced or drilled for pin/wire Fork seals are weeping a bit of oil

Selling my basically new Co-op ADV 2.3 gravel / cyclocross bike. It has at most 20 miles on it. Selling as I don't ride it as much as I thought I would (I have 4 other bikes). It's a great bike, just more of a MTB guy I guess! Size: Medium 1x11 Shimano GRX drivetrain Shimano GRX hydraulic disk brakes Hydraulic dropper post 700x40C tires 12mm Thru axles More info: https://www.rei.com/product/159860/co-op-cycles-adv-23-bike

This is one of the funnest and most versatile bikes I've ever owned. Selling as I just picked up a new ebike, so need to make room! First owner: Bought new in 2015 direct from Santa Cruz, this bike is mechanic owned and babied between almost every ride. This bike is perfect for someone looking for a dependable jack-of-all-trades whip that can carry you through long days in the saddle, but also perform in rough technical terrain, and stay composed in the air. Super nimble and precise. Noteworthy upgrades/recent maintenace: -Shimano XTR crankset -Raceface Atlas 50mm stem -Easton Havoc bars (have original Santa Cruz stem and bars if preferred) -WTB Silverado seat -NEW X01 11-Speed deraileur and shifter -NEW SRAM 11-Speed chain -NEW Maxxis 2.4" DHF front tire (not pictured) -Maxxis 2.3" DHR rear tire (on front wheel in pictures) -NEW Stans sealant front and rear -Fresh bleed on RockShox Reverb -Fresh bleed and rebuild on SRAM Guide RSC brakes -NEW rear brake pads

Custom tow winch for wakeboard, wakeskate, skimboard or snowboard. I'm sure you could even find other uses for it! I developed this design a few years back after seeing what was out there and taking design queues from some of the best winches on the market, then came to this final iteration. I had intentions of building a handful of these (I'm a metal fabricator by trade) but work and home-life have kept me busy and unable to produce more of these (let alone actually use this one...) Mostly used to tow in to shorebreak at the beach on skimboards, but they are most popular for wakeboard/wakeskate. Also super fun to tow in on snowboards! Some Key features: 6.5hp motor, CVT automatic "transmission", 600ft of line, wide tires for rolling over sand, integrated anchor stakes double as handles for transport, splash shields, adjustable speed (from 15-30mph), hitch mounts (use tow hitch on truck to transport or to anchor winch for use). Only thing that's missing is the top splash shield, which doesn't really need to be there. One of my friends stepped on it and the acrylic cracked so I took it off. It still has the splash shield to keep the reel from spitting water at the engine. These winches are super fun, I just don't have time to use it any more. Please message me if you have questions or want to check it out!

Brand new take-off from a 2015 Santa Cruz 5010. Never rode, just mounted. 32T chainring, 175mm arms. Bottom Bracket included.