BenStephens

For sale I have my great Fox 36 Performance Elite FLOAT 29 170 GRIP 2. This has been an amazing fork for me the year I have owned it and am only selling because I now have a newer fork. The Fork was serviced in September by TFT, where the GRIP 2 cartridge was replaced, and has seen less than 5 rides since. Any questions don't hesitate to ask. Cheers, Ben

For sale I have my Rockshox Super Deluxe + Debonair 230 x 57.5mm shock, with roller bearing hardware on the one end. I purchased this as a spare shock for my santacruz megatower, and as a result has seen minimal use. Full spec in the photo taken from RockShox website. Any questions don't hesitate to get in touch, Thanks, Ben

For sale I have a Ohlins 18077-09 / 76N/mm 434lb/in 67mm coil from my Ohlins TTX 2m shock, in great condition. Any questions don't hesitate to ask, Thanks, Ben

For sale I have a Ohlins 18074-12 / 88N/mm 502lb/in 63mm coil from my Ohlins TTX 2m shock, in great condition. Any questions don't hesitate to ask, Thanks, Ben

For sale I have my lightly used Leatt DBX PRO Carbon Neck Brace M/L. This is a brilliant super lightweight neck brace which has seen very little use and never crashed in, as a result is still in great condition with spare brackets to adjust between different sizes. Any questions don't hesitate to get in touch. Thanks, Ben

For sale I have a set of DT SWISS M 1700 29” Wheelset, which has been kept as a spare set and only been used a handful of times. These are a great relatively lightweight but strong tubeless wheelset, with 30mm internal rim widths. Wheels are true and tensions are correct. Rims are dent free with only minor cosmetic marks visible in the photos. Hubs are center locking boost 110x15 and 148x12 with 36 point engagement ratchets in the rear and are compatible with DT SWISS 240s parts. Drive shell is a shimano microspline, but can provide a traditional shimano drive shell for the right price. If required I have 203mm shimano ice tech rotors and center locking adapter that can also be sold with these. Any questions don’t hesitate to ask. Cheers, Ben

For sale I have the wheelset built for the santa cruz nomad v3 also listed for sale here. The wheels comprise: - Rear DT Swiss 240s hub 142 x 12mm, with shimano drive shell (easily swappable with other DT Swiss drive shells) - Front Hope Pro 4 hub bits spacing 110 x 150mm - DT swiss EX471 rims - black double butted spokes and nipples. - Continental Der Baron Project 2.4 x 27.5 tyres set up tubeless. - Spare non-boost DT Swiss 240s 100x20mm front hub to match rear hub. I also have an XTR 11 speed cassette also available that can be included for the right price. Any questions don't hesitate to ask. Ben

For sale I have my Fox 36 RC2 Elite fork, that I have owned since new and is in great condition. The fork has seen little use since summer 2018 and as a result I need to sell. The fork was 170mm originally, which I had lowered to 160mm which is the current travel, however, the 170mm air shaft is also included in sale. Additionally I will include the direct mount synchro mud guard that has been brilliant at stopping the mud flick up, without wearing down the lowers like most so often do. The lowers have some very minor marks, and there is a single tiny pin prick on the back of the left stanchion shown in the photos. Steer tube is cut to 182mm with the star nut installed. Used on my santa cruz nomad v3 frame that is also for sale. Any questions don't hesitate to contact me. Ben

For sale I have my much loved Santa Cruz Nomad V3 Medium frame, that I have owned since new. Full specs can be found here: https://www.santacruzbicycles.com/en-GB/bike/nomad/3. The bike has seen very little use since the summer of 2018, hence the reason for selling now. Main parts have been protected since new and as a result is in great condition, with only a few minor marks. Included in the sale is a Cane Creek Double Barrel Air CS, which I have found to be an incredible pairing, taking the performance of the frame to the next level. This was serviced two rides ago by TFTuned, with upgrades to the black shaft and internals as summarised in the invoice shown in the photos. Also included is a Chris King tapered headset, and hope brake mount for a 203 rotor. I can also include a set of Shimano XT cranks not pictured if requested. Please look at my other items listed for sale, as I have the perfect matching Fox 36 Elite 160/170 RC2 fork and DT Swiss 240/Hope Pro 4 EX417 wheelset. Any questions don't hesitate to get in touch. Ben