Feb 25, 2015 at 22:15Feb 25, 2015
FSA OS-150 stem, 100mm, +/- 6 deg. $15
Feb 9, 2015 at 16:06Feb 9, 2015
Pulled off my commuter bike. FSA OS-150 stem, 100mm, +/- 6 deg. $15 MEC stem, 110mm, adjustable rise, 25.4mm clamp $10 Ritchey setback seatpost, 27.2mm dia, 260mm length $15 Tektro canti cross brakes, all hardware in good condition, good pad life left, Jagwire pads on rear $20 Ritchey road bars, 44cm, scratched from removing shifters $20
Feb 9, 2015 at 15:57Feb 9, 2015
Used for only 3 rides, cosmetic damage from using with a 2x setup. Went back to a ramped/pinned big ring.
Added 11 photos to selling-stuff
Feb 9, 2015 at 15:52Feb 9, 2015
Feb 9, 2015 at 15:51Feb 9, 2015
5 bolt rotors, good condition, $10 each
Added 7 photos to selling-stuff
Jan 28, 2015 at 20:21Jan 28, 2015
Jan 28, 2015 at 20:20Jan 28, 2015
So, I found the BB shell was stripped when it came time to replace the chain and cassette so I am parting it out to pay for a new bike. 2007 Norco CCX1, used as a commuter for short ride to work, mostly fair weather. Has just over 2000Km since new. I have kept this bike clean and well tuned as I need it to be reliable to get to/from work. Bike is stripped down and all parts have been cleaned and ready to install. Parts still with good life left on them are: 105 10s R der. $10 105 10s F der. $10 Tektro cross brakes, 50% F, 30% R pad life left $15 Ritchey 44cm bars $20 FSA OS-150 100mm stem $10 Ritchey 120mm road stem (no pic) $10 Ritchey setback seatpost 27.2 x 260mm $15 FSA Gossamer compact cranks and rings 175mm $60 Mavic Aksium Race black wheelset (smooth,straight & true) $125 Norco carbon CX fork 215mm steerer $50
Added 2 photos to selling-stuff
Jan 28, 2015 at 19:39Jan 28, 2015
Jan 28, 2015 at 19:38Jan 28, 2015
Wire bead. Taken off my new bike, only 1 long test ride on them.
Jun 29, 2014 at 22:05Jun 29, 2014
You know what they look like and what they do. 105 level cassette, approx. 200Km of use. Way cheaper than Ultegra, only a few grams heavier and performs just as well.