College student, Downhiller, and love anything fun.
Jan 16, 2015 at 15:55Jan 16, 2015
2014 vivid r2c (less than half a season on this shock, probably 20 hours total). RWC needle bearing on lower shock mount (recent, so in very good shape). brand new pivot bolt kit, black (not pictured). alu/carbon version Small dent above the "i" in Davinci on the driveside chainstay. Rock slide scrape, under BB on chainstay. Paint and clear coat chips and scratches. No major dents. No cracks (not even sure if you can break these frames). Reason for selling: don't like it. Some people really like these bikes, but I am more interested in a lighter and progressive (poppy) bike. Probably 650b. $750 without shock. $825 with Manitou revox. $850 with cane creek (needs rebuild badly, has lots of air in it). $950 with 2014 rock shox r2c
Jan 16, 2015 at 14:40Jan 16, 2015
2012 kona satori frame, normal scratches and stuff; no dents or cracks. (pivots just cleaned and re-greased) 2012 fox float rp2 with new hardware 2013 rock shox revelation rl 2013 race face sixc bars (scratches but still good) These are all almost new, some are 4 days of use: 2014 shimano saint brakes 2014 sram xo type 2 10-speed derailleur 2013 sram x9 ball bearing shifter 2014 Truvativ Descendant 170mm cranks 2014 Shimano slx hubs 2014 shimano CS-M771 cassette 2014 Wtb St I23 Rim/Shimano Slx 29" Wheelset 2014 Race face 32t chain ring 2013 race face atlas seat and post 2013 truvativ 40mm stem 2015 specializd butcher 2.3 grid tires 31.08 pounds with spank spike pedals.
bjorntsc iggzdaloc's photo
Jan 15, 2015 at 0:29Jan 15, 2015
Jan 13, 2015 at 16:54Jan 13, 2015
hope pro 2 hubs laced to sun ringle eq31 rims with dt butted spokes. The front wheel is in excellent condition. The rear wheel is not true and has flat spots, but is usable (not too much wobble yet). Comes with good condition ultegra cassette (11-23t), good condition slx rotors, 60% maxxis minion dhr 2 60a, 50% schwalbe magic mary vert star. These are a good beater wheel set. If you replace the rear rim and spokes, the wheel set wold be in excellent condition. 150mm x 12mm rear. 20mm front.
Jan 13, 2015 at 16:42Jan 13, 2015
These brakes work, but have seen better days. They are good for a beater bike, or a cheap build. The front pad have about 80% left. The rear pad have about 30% left.
Jan 13, 2015 at 16:34Jan 13, 2015
Everything is stock except the handlebars have been upgraded to a set of Easton haven carbon bars. Excellent entry level XC bike. here is the build: http://www.specialized.com/us/en/bikes/archive/2013/carve/carvepro
Jan 9, 2015 at 11:56Jan 9, 2015
Never mounted. Still the newest version.
Dec 15, 2014 at 16:13Dec 15, 2014
One month of use after switching to rock shox. Custom tune with more low and mid speed compression. Davinci wilson spacers/bushings.
Dec 15, 2014 at 16:09Dec 15, 2014
Barely used, but needs a rebuild. Cased a drop with the compression turned up a bunch. Blew a seal, i didnt notice until much later. Not sure witch seal. A few rides later it had a lot of air in it. I did not want to go through the trouble of sending it out and I prefer rock shox. It has been shelfed all season.
Dec 15, 2014 at 15:58Dec 15, 2014
26, 27.5/650b compatible. Reason for selling, I am buying a complete most likely. One rebuild so far, way before it needed it, and only 10 hours on this set of seals. There is a dent above the lower crown from a crash were the fork contacted the frame. I have not noticed any changes, and the guys at the Manitou booth at sea otter said it was not going to be a problem.
182 Photos ( 0 PODs )
Video: Freeriding in a Car
4 Nov 2014
Video: Bike Hockey in the 2018 Olympics?
14 Feb 2014