Blakonator33

Here for sale is my Sunday Aaron Ross Pro series bmx bike. It’s served me well for the last few years but I’ve ran out of time to ride so it’s time to get a couple bucks back for it. It’s stock accept for the three piece stolen crank set and cult pegs on the left side. Bike rides great and only has cosmetic wear like scratches and paint chips on the frame. Here is a link to all the important information on this bike: http://www.sundaybikes.com/2012/03/grape-soda-bonus-bike/ Message me if you have any further questions. Regards, Blake

So for sale is my 2012 Devinci Wilson. Everything has been recently tuned and the bike rides flawlessly. It's also been built with some amazing components. Here's a list of them: Fox DHX RC2 Shock (cane creek 400X3.50) FOX 40 RC2 FIT Kashima Fork Sram DB5 Brakes Stans Flow EX rims Stans 3.30 HD Hubs Spank Spoon handlebars Shimano ZEE cranks E13 LG1 chainguide Schwalbe Magic Mary tires Shimano 10 speed shifter Shimano ZEE derailleur Syncros seat FSA headset More lock-on grips The only con of it is the little bit of wear over the seal on the fork. When it was tuned they said it was fine but it may go through seals a little faster. But as a result the frame and linkage was stripped of parts and re greased. brakes bled, forks serviced with new seals and oil, wheels trued and a full bike service carried out on 26th of September. The break pads and tires are pretty fresh so they have a lot of life left in them. But with a bike like this you really have to see it in person. It's perfect! If you have any questions please message me. Thanks, Blake.

It's quite simple. I have a foxshox 225X3.80 spring for a downhill shock. Pulled it off my Fox DHX RC2 because the spring was to soft. If you have any questions message me. Thanks, Blake.

Up for sale this time is my Single Speed set up with a Shimano Alfine tensioner. Basically I took this off my Devinci Wilson so I could make it nine speed. Everything you need to make a bike single speed is there. Here's a more detailed list of the pieces. - Shimano Aldine tensioner (basically the derailleur) - Sram chain PC 1031 - Shimano HG CS-4600 11T one speed cassette I don't know much about it but if you have any questions message me. Thanks, Blake.