cymruambyth

Whyte E-180 RS. Frame Size: L Wheel Size: 27.5" / 650B Material: Aluminium Front Travel: 180 mm Rear Travel: 180 mm I have owned this bike from new (Sept 2020) and it has been absolutely faultless. Only selling as I have been offered a great deal on another new bike….after I fitted a lot of upgrades as I intended to keep. The frame bearings have been changed 150km ago along with a fork and shock service from Indi Cycle Works in North Wales. Chainring, chain and cassette changed approx. 300km ago so plenty of life left in them. A new motor was fitted 1030km ago by Alf Jones cycles in Wrexham. There are a few scuffs and scrapes as you would expect with a second hand mountain bike but the bike is in great condition and mechanically perfect. Over £700 of recent upgrades listed below. 1) SRAM NX Cassette - I found the original cassette wore out too quickly so I have changed the hub body and cassette and they last much longer. 2) Front maxxis DHR tyre-as new, rear Maxxis dhf -brand new and unused. Both dh casing. 3) Brand new shimano xt pedals (£79.99) 4) Brand new BX dropper fitted and unused (£140)– I will also include the crank brothers original dropper that has wear on the rear but works perfectly. 5) Brand new Saint brakes (used around 4-5 times) (£379.99) 6) Genuine Shimano Saint finned brake pads 7) ODI Black grips 8) Fizik Alpaca saddle (5 rides old) with multitool, carrier and canister holders x 2. (£119.99) Other original spec items :- MOTOR Bosch Performance Line CX (Gen 4). 85 Nm max Torque, 250 W nominal power, 2.79 kg 4 Power settings including progressive eMTB mode which automatically adjusts the support BATTERY Bosch 625 Wh internal PowerTube. Reaches full charge in 5 hours with supplied 4A Compact Charger, 80% charge from 0 in 2.5 hours DISPLAY Bosch Purion SPECIFICATION COLOUR Matt Black with Burnt Orange & Slate FRAME 6061 Alloy, Hydro Formed T6 Aluminium, Multi Butted, Custom Drawn, Tapered Headtube, Internal Cable Routing for Dropper Post and 12mm X 148mm Boost Dropouts CHAIN SRAM GX Eagle, 12 Speed FORK Fox Float 36, Factory 27.5", 180mm Travel, 44mm Offset with Grip 2 Damper and custom tune, Tapered Steerer, 110mm x 15mm Boost, E-Thru Axle CRANKSET Race Face Affect E-Bike, 165mm, ISIS with X-SYNC Direct Mount 34T for Bosch Gen 4, Black REAR SHOCK Fox X2 Coil, Factory, independently adjustable Compression and Rebound damping, Kashima coating with sls spring. HEADSET FSA No. 57E Orbit ZS, 1 1/2" Lower and 1 1/8" Upper Sealed Cartridge Bearings HANDLEBAR Race Face Turbine R, 35mm Rise, 35mm Bar Bore, 800mm Wide SPOKES DT Swiss Hybrid triple butted 2.34mm/1.8mm/2.0mm, Black Stainless, DT Pro Lock Squorx Nipples STEM Race Face Atlas, 35mm Bar Bore, 35mm Extension SHIFT LEVER SRAM X01-E Eagle, Single Click, MMX, 12 Speed REAR MECH SRAM GX Eagle, 12 Speed Pick up only.

Hightower LT 2019 frame only Fox DPX2 shock 9 Months use-mainly Xc riding New bearings fitted 2 weeks ago by Beics Brenin under SC warranty-not used since. Good condition, usual stone chip marks etc,cable wear shown in pic. Stunning bike in the higher spec CC carbon. Bought as frame 9months ago for £3,200-grab a bargain.

Santa Cruz Bronson Carbon 2014 model bought new March 2015 Custom build includes Mavic Enduro Wheelset with tubeless setup. High Roller tyres Pike Rct3 160 forks serviced by J tech and 2 tokens placed. Fox float kashima shock Reverb stealth dropper, replaced under warranty 3 months ago Xo carbon cranks Xo rear mech Hope headset/bb Avid trail 9 brakes Renthal carbon bars (780) Xtr pedals Hope seat clamp Offset bushings has head angle at 65.5 Wtb volt saddle Frame Bearings replaced 10 rides ago, also comes with carbon frame guard, and spare linkage with new bearings Nicest, lightest Bronson you will place your eyes on. Dm for more info, no postage, pickup only.