danjt1984

Airdrop Edit V2. Frameset in very good condition with no scratches or dents. Airdrop decals removed and the bike currently has Manitou decals in their place but new decals for bike can be purchased directly from Airdrop. New bearings for the entire frame just recently fitted. Manitou Mattoc Pro 2 160mm forks in excellent condition other than a couple of small scratches from storage but stanchions in perfect condition. The forks are performance wise like new as they have only been ridden for a hand full of rides. Works Components 1 degree angleset headset fitted taking the head angle to approximately 64.7 degrees. RockShox Monarch RT3 rear shock. The shock has one very small mark on the shaft but its not large enough to affect performance (see photo). Hope Tech enduro wheelset (red pro2 evo hubs) Avid x0 carbon levered brakes front and rear Sram 1x11 x1 groupset with new Shimano slx cassette and Absolute black oval chainring. New nukeproof Horizon bottom bracket. Renthal al fatbar and apex stem Bike set up tubless with Vittoria Goma tyres (lots of life left on tread) Fabric saddle Brand X dropper post 150mm drop with Bontrager dropper remote lever.

2016 Trek Remedy 9 frameset with spare rocker link, new unused seat stays and spare just serviced fox float ReAktiv 3 position shock. The bike has been sat in storage for over two years unridden. I cannot justify just leaving the bike to sit gathering dust. Size 19.5 frame in excellent condition. Spare unused seat seats included and spare original rocker link with some paint damage so I purchased a brand new rocker from Trek. Rock Shock pike RC 160mm forks (spare 150mm travel airshaft I will include) Marks on the top of the crown but the stanchions are scratch-free and unmarked. Hope pro2 evo wheelset (front wheel is a tech enduro and the rear wheel is an unbranded rim on pro2 evo hub) Shimano 2x10 xt drivetrain - very little use avid exlir R brakes (unused as newly fitted) Brakes currently have matchmaker clamps fitted which leaves an obsolete fitting point (see photos) this could be fixed with the purchase of new clamps for the brakes levers or probably modified by cutting the tabs off. I never got around to this as the bike was in storage after been built up. Rockshox reverb seatpost. Rockshox Monarch RT3 fitted. Fitted with Burgtec titanium offset bushes.