endless-summer

2016 Knolly Warden Large/Extra Large Matte Black Frame Located in East Van but could meet along the sea to sky corridor if needed. Recent tune up at Dunbar cycles so its running good (can provide receipt). Fork: Rock Shox PIKE RC Solo Air w/Charger 160 travel x 15mm axle (services last year) Shock: Fox DPX2 (2020) in the rear. Head Set: Cane Creek "40" series - ZS44 upper / ZS56 Lower Stem: Race Face Turbine - 60mm x 31.8 x 0° Rise Bar: Race Face Turbine - 760mm x 31.8 Brakes: SRAM Guide Ultimate - some paint flaking off the fluid chamber, pads of lots of life still Shifters: SRAM X1 - 11 speed trigger Seat Post: KS LEV Integra 150mm w/ Southpaw lever Post Collar: Chromag NQR clamp - black Saddle: Chromag Lynx DT - black Crankset: Sram X1 Chain Guide: MRP AMG 28-32t (a fair amount of paint rub since I tend to hold my ankles close to the cranks) Rear Derailleur: SRAM X1 - 11 speed Cassette: SRAM XG 1180 10-42t Chain: SRAM PCX1 w/powerlock Wheelset: New Raceface aeffect rear wheel and Stans flow in the front. New Maxxis tires (Dissector in the rear and minion in the front) with only about 5-6 rides on them. Both are currently tubeless. Bike is also ridewrapped to protect from rub and chain-slap. Only con is in the rear triangle the chain has impacted the frame a small amount since the limit screw wasn't set properly. See 3rd photo. No issue regarding structure though. I'm about 6'2 and the bike is a tad small for me but still works. I've had this out in the chilcoltins multiple times and it's never let me down. Making room for a new bike but sad to let the 27.5 go. I can also add a cane creek rear air shock as well (Cane Creek DB Air with climb switch). It will require service since the chambers compressed (been given a $200 quote originally), but could be sold for $350-$400 after. I can also include a pair of used raceface Affect pedals for an extra $50 if you don't have you own. Thanks

The bike has been collecting dust for a few years now after a hiatus from biking. I upgraded to a new bike this year so the bikes get no attention and now I have no room. Its a 26", but still rolls great downhill. Very agile. I'm 6'2 and have found it just a bit to small for myself, so someone in the 6'0 range would suit it perfectly. Its not impossible to pedal up and can make the road up Grouse, but it certainly wasn't design for huge climbs. Not looking for any trades or parts and would prefer a buyer in the lower mainland. I live near UBC but work in Coquitlam so I can meet along 12th or highway 1 without an issue. Most of the bike is stock with fox 36 on the front. The lowers were replaced after a warranty issue (and they didn't give me a sticker kit with it, which was lame...). It pretty much stock for the most part and wouldn't be coming with the pedals in the photo. Thanks, https://www.giant-bicycles.com/ca/reign-sx-2010

Its been collection dust for quite some time in the garage, and I need to clean things out and make room. I havn't ridden on it in years, but it was a great fork back in the day and needs to get back on a rig.

The reminnance of an old DH bike. Its been sitting in storage for some time now. It could potentially be a good starting place for an into build for someone looking to get into mtn biking cheaply and get some mechanic skills in the process. Theres no wheelset on it, and the rear derailleur cable/housing needs to be replaced along with the front brake pads. Theres also no pedals on it. Any other questions or more photos, let me know.