Give'r the beans!
Nov 30, 2015 at 12:4323 hours
I am selling my custom built NS Majesty Dirt Jumper. I built this bad boy up from the frame and hand picked all the parts and it definitely shows! I built this up in the spring of 2013 while I was working as a mechanic at my local bike shop. Here's the build list: Frame: NS Majesty Dirt Fork: Rockshox Argyle RC Wheels: NS Fundamental 26" w/ NS Rotary Pro hubs, single speed rear; handbuilt by myself Brake: Avid BB7 rear only w/160mm rotor Cranks: Profile Racing Chromoly Race 3-piece w/25t sprocket Tires: Schwalbe Table Top f/r Handlebar: Raceface Atlas 1.25" rise cut at 750mm Stem: NS 50mm Pedals: Demolition Plastics Saddle: Demolition Pivotal Seatpost: Gusset Pivotal Chain: Shadow Conspiracy Half Link Headset: Demolition Integrated Grips: ODI Longneck Total weight for the build was about 26 lbs. This bike has been awesome for not only dirt jumping but just all around street and park riding. Unfortunately there aren't a whole lot of good dirt jumps where I live and I suck at park riding. Everything is in good shape, I just rebuilt the fork this summer, wheels are nice and true and bearings all feel smooth. There are absolutely no dings, dents, scratches or anything wrong with the frame. This baby is bomb proof and ready for many more years of hard shredding! I'm selling this beauty in order to build up a fat bike for the winter. If you have any questions please message me here and I will get back to you asap. Thanks for looking!
rode in Helena. view ridelog
Nov 2, 2015 at 18:01Nov 2, 2015
rode in South Hills. view ridelog
Nov 2, 2015 at 18:01Nov 2, 2015
Oct 28, 2015 at 21:38Oct 28, 2015
I'm selling a pair of Industry Nine Torch Mountain hubs with an XD driver. The front is a 15x100mm and rear is 12x142mm. They are both 32 hole, 6-bolt and take standard j-bend spokes. I had these built up in a set of carbon wheels this season that ended up cracking. Ended up buying a different wheelset to get by and never built a new wheelset with these hubs. There is a bit of tubeless sealant that has dried on to the front hub that I have struggled to clean off for hours now. Other than that the hubs are in great condition. The bearings all spin smoothly and have no play and the driver body sounds like a beehive. I will only ship these within the United States and buyer assumes all shipping costs. I'm not interested in any trades and will only accept payment through PayPal. If you have any questions or concerns please message me and I'll get back to you ASAP! Thanks!
Oct 28, 2015 at 21:05Oct 28, 2015
I'm selling my custom built Knolly Warden. This bike was Vital MTB's Bike of the Day on May 31, 2015. A few parts have changed since then, which I will list out later. She's been an absolutely beautiful bike, both in looks and riding abilities, and I'm a little sad to let her go. I raced the Montana Enduro Series this year aboard her to a 4th place overall in Cat 1 Mens. Yes, she's been ridden hard, but she's also been loved and cared for pretty hard too. I only hope that she goes to a similar owner who will ride and care for her just as I have. As for the parts that have changed the wheels are the big one. I had some bad luck running carbon rims this year and ended up buying a set of Stan's Flow EX wheels to get through the season. The fork has a brand new steerer tube, uppers, air spring and damper cartridges due to a warranty replacement. I also had a crash recently that cracked the handlebar (It was a really hard and painful crash!) and blew up the brake levers. The bar is brand new, same model. The brake levers are now a set of XT M8000's. Yes, that's right, the new sexy black ones. Oh and there's some new grips too. Just a pair of ODI Ruffian Lock On's. So here's the full build list, frame up: Frame: Knolly Warden size Medium Day Glo Green w/custom camo decals Shock: Cane Creek Double Barrel Inline Headset: Cane Creek 40 series Fork: DVO Diamond 160mm w/custom camo decals Wheels: Stans Flow Ex laced w/Stan's 3.30HD hubs, tubeless ready Brakes: Shimano XT w/new XT M8000 levers Crankset: Raceface Turbine Cinch 175mm w/30t DM N/W ring Drivetrain: SRAM X01 Rear der. w/XX1 chain, X1 shifter and X1 cassette Handlebar: Deity DC31 Mohawk Stem: Deity Cavity 50mm Grips: ODI Ruffian Lock On Seatpost: KS Lev 150mm w/South Paw lever Saddle: SDG Circuit The tires I will leave up to you. You have a choice of Maxxis' Highroller 2, DHR 2, DHF or Ardent, all brand new 27.5x2.35/2.4 3C EXO TR for the front and rear. She will also come with new Shimano Ice Tech pads, metallic or organic, again up to you. Total weight comes in right around 30-31lbs. She has been ridden for a full season and she definitely shows some sign of it, but nothing serious. There's a few small paint chips here and there and scuff/cable rub marks but nothing that goes through the paint and into the frame. The fork has a rock scratch on one of the lowers underneath the crown. Again only goes through the paint, but still there. The wheels are in good shape. The hubs spin smoothly and the rim is nice and true. I will touch them both up upon selling just to be thorough and double check spoke tension. The chain will be brand new, unridden when shipped off and has been frequently replaced throughout the season. The cassette and chainring are both in good shape and have shown no signs of skipping or slipping. Pedals are not included. Now for the selling terms. I'm selling her used and as is. I will only accept payment through PayPal. I'm not interested in any trades. I will have it boxed up at the local bike shop and ship it out via FedEx. Buyer assumes all shipping costs, including any insurance or expedited fees. If you have any questions or concerns please message me and I will get back to you ASAP! Thanks!
harm0n20 MontanaEnduroSeries's article
Sep 23, 2015 at 20:18Sep 23, 2015
MES Round 6: The Last Stand Results and Photo Epic
Awesome end to an awesome series! Definitely looking forward to next year!
Aug 26, 2015 at 21:05Aug 26, 2015
I have a brand new, never had a part mounted to it Transition TR500 in size large up for sale. Frame can run either 26" or 27.5" wheels and has adjustable chainstay length, bottom bracket height, head angle and travel. It has internal routing to keep things sleek, integrated fork bumpers and best of all, a threaded BB shell so you don't have to fuss with those awful pressfit BB's! As I said before, it is a large size frame. It comes with a Rockshox Vivid R2C2 rear shock with a 450lb spring. Shoot me a message if your interested!
Aug 12, 2015 at 23:25Aug 12, 2015
I have one, never used Atomik Carbon 29" Trail Hookless rim up for sale! This rim has never been laced and was only pulled out of the box for pictures! Features a super wide 26mm inner and 33mm outer width. and weighs in at 400g! Perfect for a lightweight enduro/trail build! This rim came without decals but I do have some red decals if desired. I can also tape the rim for use as tubeless at no extra cost if requested. This bad boy retails at $435 USD and I'm looking to get $350 for it. Buyer pays shipping and I will only ship within the continental US. If you have any questions please feel free to message me and I will get back to you ASAP! Thanks for looking!
Aug 12, 2015 at 23:14Aug 12, 2015
I have two Atomik Carbon 27.5 rims available for sale! One is brand new, never laced, and the other one has less than a week on it! These rims are super light, super stiff, and super rad! They weigh in at 400g +/- 15g per rim and feature a super wide 33mm outer width, 26mm inner. They feature 32 spoke holes directionally drilled for stiffness. Perfect rims for a super lightweight enduro build! Both rims came without decals although I do have some red decals available if desired. I can also tape up both rims to be run tubeless if requested at no additional cost. The rim that was ridden on a couple times has a few cosmetic scuffs, nothing through the outer finish coating. I took a close up photo of the worst one. Definitely nothing that would compromise the integrity of the rim itself and really hardly noticeable when looking at it. The new rim is the Mod-hook version, which has slightly thicker bead hook, 3.5mm and 1mm deep. The slightly used one is the hookless version which drops a tiny bit of weight. I would personally run the Mod-hook in the rear and the hookless up front. These rims run $435 MSRP but I'm looking to get $300 for the slightly used one and $350 for the brand new one. The pair goes for $600. Buyer pays for shipping and I will only ship within the continental US. If you have any questions please feel free to send me a message and I will get back to you ASAP! Thanks for looking!
- NS Majesty Custom Built! 26 lbs!! DJ/Street/Park Bikes 1,200 USD
- Knolly Warden Custom Vital Bike of Day! XC/All Mountain Bikes 4,000 USD
- E.Thirteen Heim 3RS Dual Chainguide Chains/Guides/Cogs 50 USD
- Bern Watts Helmet Size Large Helmets 35 USD
- Bontrager Specter XR size Med. BRAND NEW IN BOX! Helmets 75 USD
MUST WATCH - Garrett Reynolds - Street Destroyer
14 May 2015
Interview: Cedric Gracia
8 Jan 2013
Ian Morrison, meet Steve Smith - Video
15 May 2012