j4ckal

Up for sale is my 2021 Marin El Roy 29er hardtail. Purchased new by myself last June. It is the size Large or El Grande as Marin call it. It's of very modern, long low and slack geometry (510 reach, 63 degree head angle, 78 degree seat tube angle). This makes it suitable for Enduro and even Downhill duties but still climbs exceptionally well due to the steep seat tube angle. It's a great classy looking steel bike with some nice touches in a lovely metallic black finish. Components are solid for the money with Deore 12 speed drive train and shimano 4 pot brakes, marzocchi Z1 forks and marin branded wheels (shimano hubs) and finishing kit. The tyres are the excellent Maxxis assegai in dd rear and a brand new Specialized Butcher grid trail on the front (now 2 rides old). Its had a year's worth of (not that frequent) use but has obviously been used and will show some marks/scuffs and wear/tear to the drive train, cranks, forks and marks on the dropper. It does have helitape applied in the high wear areas. Had a new praxis bottom bracket a few rides ago. Overall in a lovely condition and one of the cheapest ways to try out some very modern LLS geometry. I'm 5'10" and it fits spot on. Surprisingly fast, stable and comfortable for a Hardtail. *Pedals, bottle cage, front proguard and bolt on wolftooth storage strap not included in sale* Cash on collection only please (Near Chesterfield, North Derbyshire).

Up for sale is my 2017 Specialized FSR Enduro Comp 29 in size large. It features 11spd sram GX (10-42), with guide r brakes and rockshox yari up front, 29" wheels. The spec is as standard other than there is a set of 2.5" maxxis dh casing maxxgrip tyres fitted (there's are an excellent tyre for dh type riding/uplifts but are hard work for general pedalling), Shorty front and minion dhrII rear (both set up tubeless). I've also fitted some renthal grips. It has 160mm travel upfront and 165mm travel in the rear. Excellent enduro/race/mini dh bike but will also climb well due to the modern geometry. This is model year 2017 and was purchased new by me from leisure lakes, booklets and original receipt available. The bike is obviously used with scuffs/scratches/chips, but still looks good. It has been helitaped from new. There is a very small shallow dent in the bottom of the downtube (see pic). Wear to the crank arms (cosmetic only). The dropper post is slightly sticky (seems ok after a relube and is working fine at the minute) and the freehub bearings are getting ready, just had a new bottom bracket fitted (1 ride old). Pedals NOT included but will include the specialized top cap chain tool/link holder. Cash on collection only. Any questions just ask.

Up for sale is my barely used 2017 Scott Speedster 10 disc. It's a size medium/54cm. I'm just under 5'10" and it fits perfect. I bought this last year but have only used it around half a dozen times (prob 150 mile) so it's in excellent condition. It has a Shimano 105/ultegra groupset including hydraulic discs which are great, especially if you're a mountain biker and used to good brakes. The finishing kit is syncros (which is actually quite nice) and features flared wider bars and a carbon seatpost. There are a few little marks here and there mainly from storage and a couple of little scuffs on the hoods. *Bottle cages and pedals NOT included in sale.* Cash on collection only please.

Up for sale is my brand new warranty replacement 2016 Norco Sight Killer B (A7.1) frame. It was a warranty replacement for a 2014 Sight Killer B1 frame (bought new by myself from Evans). It's a size large in matte flouro/kawasaki green. It comes with the original cranks, shock and headset (bb and headset bearings could do with replacement/re grease and shock not been serviced in a while) as Evans refitted all these, it's a new rear axle (142x12). Stealth dropper routing. I will also chuck in the original wheels off the bike which have been used a fair bit. There is a hefty ding in the rear and a spoke missing in the front (think of them as free with the frame) but both usable. I've also got the front mech that should fit it too if that's your thing. Cash on collection only from chesterfield (north Derbyshire) area. Thanks.

Up for sale is my first gen Stanton Switchback, size 16.5". Frame is in lovely condition with a few slight wear patches but a lot of it is helitaped. Spec as follows: RS revs rct3 (very tiny mark on one stantion) Hope pro 4 enduro front, pro2/flow rear set up tubeless (new rear tyre) XT brakes and 1x11 drivetrain with raceface cranks. Hope purple BB Hope headset Hope dropper seat clamp Raceface turbine stem and renthal bars. Standard, non dropper, post (see below) It's all a couple of years old now and has obviously been used. Its probably ready for a chain/cassette (still shifts fine though) and the clutch on the mech is a little dodgy so I leave it off, absolutely no probs with dropping the chain as the chain guide is fitted. The reverb that is currently fitted works intermittently, so I'll say this isn't part of the sale and a non dropper cheapish post will be fitted in its place. I will throw in the reverb though incase it can be fixed/serviced. Any questions just as and can send more pics. Cash on collection only from north Derbyshire area. £795 Cheers.