Block user

Recent

Selling
Jun 23, 2014 at 12:13
Jun 23, 2014

Shimano Saint 170mm 68/73mm Cranks

$50 GPB
For sale are my Saint cranks as I sold my frame and no longer need these. They are in great condition with minor scuff marks. The saint logo is hardly scuffed which shows the lack of use. They don't come with a Bottom Bracket but can include a 36t Blackspire chainring for an extra £5. The back of the drive-side crank has been filed down slightly to make it fit with my chainguide. this does not affect performance or strength. If anything it reduces weight.... Crank length is 170mm and they fit to a 68 or 73mm bottom bracket shell. These cranks are for a single ring set-up Postage not included in price

Added 3 photos to saint
Jun 23, 2014 at 12:12
Jun 23, 2014
May 31, 2014 at 5:50
May 31, 2014
jacob-jay-12 mike29's video
May 12, 2014 at 8:06
May 12, 2014
video
yeah, that's the one thing i hate about moelfre, the wind. Nah, people recommended them but i was fine with just a sling

jacob-jay-12 mike29's video
May 12, 2014 at 7:39
May 12, 2014
video
i could barely even move for a week it hurt so bad. Just take it easy and wear the sling so it heals better. It was at the 2 step down near the top. didn't get enough air on the 2nd and went over the bars

jacob-jay-12 mike29's video
May 12, 2014 at 3:00
May 12, 2014
video
broke my collarbone at moelfre as well. though i think mine was a bit more spectacular ;)

May 1, 2014 at 9:03
May 1, 2014
Selling
Apr 28, 2014 at 8:37
Apr 28, 2014

Intense SS Slopestyle MK1 Medium (Problems)

$275 GPB
I'm selling my Intense SS slopestyle frame. it's a mk1 2009 in black. size is medium but top tube is quite short as it's a freeride frame. Not sure how to value it as it has a few issues. Comes with Fox DHX 5 shock. I've had the frame for 2 years but hardly used it in the past year. Some cosmetic damage to the paintjob such as a few chips at the top and some small scratches around the rear end. Frame has been de-stickered as i didn't like the mk2 decals the previous owner had on Spec- BB Shell: 73mm Rear end: 135mm, 10mm Headtube: 49mm top and bottom travel- 165mm (takes forks from 160mm-180mm) I can include seatclamp for free and a cut down Thomson seatpost for extra. I also have a nukeproof warhead headset that i had on the frame to run a 1 1/8th fork. however the bottom bearing needs replacing Problems- 1. I tried to show it in a picture bit it's not clear, in the drive side BB shell, one of the threads near the end has been stripped. this means that when fitting a bottom bracket it's really hard work towards the. I'm not 100% sure but i think some bike shops can fix it 2. One of the grub screws in the VPP linkage got stuck and i tried drilling it out but that just made it worse. The bolt seems to stay in place so i don't think it's a big deal 3. The shock is starting to leak some oil onto the shaft. so it could do with a service. no problems with bushings 4. mech hanger is slightly bent. seems to run ok with gears 5. one of the bearing pre-load bolts look broken but you just have to make sure your allen key goes deep into it As I said i'm not too sure on the value so i'm open to offers. price doesn't include postage. as it's a large item it would be good if you picked it up or alternatively i can travel to manchester or liverpool train station to meet up.

Added 11 photos to Intense-SS
Apr 28, 2014 at 8:19
Apr 28, 2014
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2014. Pinkbike.com. All rights reserved.
dv16 0.055949
Mobile Version of Website