jhando

You are viewing a stunning Enve AG28 gravel bike wheelset. The wheels are Brand New and unused in the original box with accessories. They are a hugely desirable wheelset suitable for the highest spec build, they have an RRP of £1800. The rims are handmade in the US by Enve (the individual manufacturers have their names printed on the rims) They wheels themselves were then hand built by expert wheel builders Saddleback here in the UK More info on them can be found here https://saddleback.co.uk/products/enve-foundation-ag28-gravel-wheelset https://enve.com/products/ag28 The wheels are a 650b Enve carbon rims laced onto Enve hubs They are disc brake only and take a centre lock rotor. The front hub is 100mm x 12mm and the rear is 142mm x 12mm The rear hub is an Enve 360 Instant drive HG splined hub The Carbon rims are tubeless compatible, have a 28mm internal width and a 36.5mm external width, they can take a tyre up to 57mm wide. The accessory set includes valve stem kit wheel user manual rim tape alcohol wipes warranty card Enve decal The wheels are brand new and unused and are ready to be fitted to a bike. The box may have some minor cosmetic damage from storage

You are viewing a Stanton Slackline Gen 1 MTB Frame in gloss metallic blue It is a steel frame that is designed for 26" wheels and a fork with around 140mm of travel. You can build it up as a lightweight bike and use it for XC or commuting or you can build it up into a trail bike or even a hardcore hardtail More info and detailed geometry can be found here https://spokemagazine.com/stanton-slackline-631-share-the-love/ https://bikemagic.com/gear/mtb-gear-reviews/hard-hitter-stanton-slackline-631-frame.html The frame is for 26" wheels and has a straight head tube. It has 135mm quick release rear drop-outs It has ISCG05 chain guide tabs It takes a threaded bottom bracket, the bottom bracket shell is 73mm The seat post is 31.6mm it is disc brake only, and it has a removable mech hanger (included) It has full external cable routing to keep things organised The frame is in excellent working order and is ready to be built up into a very capable bike The frame was totally stripped down and repainted in metallic blue, it was rebuilt but never ridden so is in excellent condition, there are a couple of very minor blemishes here and there but nothing that really stands out (see photos) Overall this is a super used frame that is ready to be built up and ridden Thanks for looking, please check out my other listings

You are viewing a RockShox Lyrik RCT3 dual position MTB suspension fork The fork is in pristine condition, it has been fitted to a bike but only ridden on the street a couple of time (see photos) This is a top on the line fork with an RRP of over £1000, the best price I could find for a new one online was £889.99 https://activesport.co/epages/80c85f8f-7a95-4b1c-9c30-e64b314f3f2e.sf/en_GB/?ObjectPath=/Shops/80c85f8f-7a95-4b1c-9c30-e64b314f3f2e/Products/RS965802 It is for a 29" bike and is for a 110mm boost hub It is a dual position air sprung fork so you can switch between 160 and 130mm of travel at the flick of a switch without affecting your settings It has a tapered steerer tube cut to 190mm and there is a star fangled nut fitted. It is for a 15mm x 110mm boost hub and the bolt through Maxle Ultimate axle is included in the auction too. It has 35mm fast black stanchions (unmarked) The serial number of the fork is 19T90522257, you can check out the spec of this exact fork through Sram's website here https://www.sram.com/en/service/models/fs-lyrk-rct3-b1?t=19t90522257 more info can be found here https://www.bspbikes.com/product/rockshox-lyrik-rct3-dual-position-air-29-inch-240689-1.htm Being the RCT3 model, it has 3 position (open / pedal / firm) high speed compression adjust by turning the outer dial on top of the right leg, it also has separate low speed compression adjust by turning the inner dial on the same leg. It has rebound adjustment at the bottom of the right leg. The air pressure is adjusted using the valve on top of the left leg, and the travel adjust (160mm / 130mm) is also on the top of the left leg there is a weight chart on the fork to help you set it up correctly It is also compatible with E-bikes, you just add an extra 10PSI to your air pressure settings The fork has been fitted to a bike but has had virtually no use and as such it is in almost new condition. As far as I can see the only marks are a small scuff on the bottom of the rebound dial and a couple of small scuffs under the dropouts (last photo), the stanchions and crown are unmarked, even the lowers and stickers are free from any damage (see photos) I am also selling other high quality bike parts so please check out my other listings.

You are viewing a BOS DeVille MTB suspension fork It is an air sprung fork with 160mm of travel, and is for a bike with 27.5" wheels. It has a tapered steerer tube cut to 170mm and there is a star fangled nut fitted It is for a 20mm x 110mm (non-boost) hub and the bolt through axle is included in the sale too. This is a top of the range fork with an RRP of over £1000, the fork has received excellent reviews There is some more info and reviews here https://www.northwestcycles.net/components/forks-shocks/bos-deville-suspension-forks-160mm-travel--650b-white__5614 https://www.mbr.co.uk/reviews/forks/bos-deville-160-review It is super tuneable, on top of the left leg is the air pressure valve which you can adjust according to you weight / riding terrain. There is rebound adjust on top of the right leg. At the base of the right leg there is separate high speed compression adjust (red dial) and low speed compression adjust (silver dial) It is in excellent working order and being a BOS fork it is buttery smooth and extremely capable. The stanchions are in good cosmetic condition, there is a very small surface blemish (see last photo) this has no impact on the performance at all. The crown has a small area of cable rub and the red part of the rebound dial has a scuff, again purely cosmetic. The lowers do have some cosmetic marks mainly to the decals (see photos)