lockwood mattwragg's article
Dec 24, 2014 at 9:29Dec 24, 2014
Hope Tech Enduro Wheelset - Review
I've had many pairs of hope hubs, big uns, bulbs, pro 2 and then pro 2 evos - I've never had a cassette fall off....
Dec 18, 2014 at 2:56Dec 18, 2014
For sale are my Fox 32 float RLC. These have been on my bike and are in very good condition. They have just had a full service - new oil in the fit cartridge and lower leg lube. 1.5 to 1 1/8 Taper steerer cut to 182mm - these were on a medium intense with two 5mm spacers so its plenty long enough for most modern frames Fit RLC cartridge, so you have adjustment for rebound,lockout and low speed compression 15mm bolt through lowers post mount brake tabs SKF low friction seals The travel is currently set at 120mm but can be altered up to 150mm or lowered to 80mm as it has the longer FIT cartridge in. The top caps and adjusters are mint, no rub marks or scratched The stanchion are spotless as seen in the picture with the lower legs off. The lowers are in very good condition, Forks are available for viewing and collection from Stockport in Manchester or postage at your cost approx £10 Think that's everything but any questions please ask. please note im not interested in any trades.
Added 8 photos to 2014
Dec 18, 2014 at 2:34Dec 18, 2014
Nov 27, 2014 at 3:43Nov 27, 2014
For sale is my thomson elite limited edition seat post 31.6 size 410mm long Post is in very good condition with the only marks about and inch from the maximum height line Looking for £40 as this cost me £90.
lockwood DoyenUK's photo
Nov 10, 2014 at 14:32Nov 10, 2014
Added 3 photos to 2014
Nov 9, 2014 at 14:45Nov 9, 2014
Nov 9, 2014 at 14:32Nov 9, 2014
For sale are a set of pro 2 Evo in red on mavic 721 rims, built with black dt Swiss spokes 32 hole 135 qr rear 15mm bolt through front The rear can be converted to other sizes 142x12 for example by swapping the hub end caps for about £12. The front can also be changed to 20mm or qr by the same method. The wheels have been on my 4x bike and have done very little Both hubs are very smooth and have been well looked after. The rims are In good condition with a few scuffs to the decals and paintwork Rotors, cassette and tires not included I would prefer collection from Stockport in Manchester but will post at your expense Any questions please ask
Sep 29, 2014 at 11:28Sep 29, 2014
Gents for sale is a set of fox 32 fit RL's Tapered steerer 1.5 to 1 1/8 190mm long 100mm travel Fit damper cartridge with rebound and lockout Post mount disc tabs Forks are in good condition with only a few scuffs to the paintwork. I've just changed the oil and bled the fit cartridge. The forks came on an xc bike I bought for some other parts and these aren't needed, stanctions are clean Quick sale wanted hence price Price is £120 posted to your door
Aug 13, 2014 at 6:32Aug 13, 2014
For sale is an old set of fox 32 stanction, i bought these a while ago but they have sat under my desk for the best part of a year now. ive dropped the price as want rid. The steerer is 1.5 to 1 1/8 tapered. 205mm long They were removed from a 140mm set of floats, I believe these will fit all 32's but please check. there is very very slight wear to the left leg, this hasn't gone through the gold coating but is slightly discoloured. collection from stockport in manchester or postage at your cost of about £5
Photo by Slade676