matthewp

Recent version White industries Campagnolo Freehub Freewheel Titanium Up for sale is a good condition freewheel for White Industries hubs. Campagnolo specific 11speed, three pawl version with springs, but no pawls included in sale. Bearings are in good condition, one bearing seems a little dry but still runs smoothly - will just need a bit of grease inserted to run optimally. Here's more information: https://www.whiteind.com/product/freehub-bodies/ Made from 6/4 titanium Compatible with either 24T or 48T engagement systems Freehub bodies come with: 2 bearings installed 3 pawl springs This was on a T11 hub, but compatible with most other recent White Industries hubs: CLD CLD+ XMR XMR+ XMRT T11 *Mi5 11 speed **H3 Accepting offers. Thanks for looking!

Hi there - I have an excellent condition set of 26” wheels for sale including tires and hub parts. Here’s the breakdown: WTB KOM i23 rims Sapim Race spokes Front Hope Hub (20mm and 15mm x 100 axles and caps!) Rear BHS Hub (QR 9mm AND 135mm x 10mm thru axles!) DT SWISS 10mm thru axle for rear hub. Perfect condition! 2x very good condition WTB Trailboss tires installed tubeless (well sealed, but will be deflated before shipping, can add more sealant through valve) 2x NEW WTB tires (vigilante 2.3 and Bronson 2.1) 2x NEW Extra freehubs (the one installed works perfect still, but has cogset install marks. I removed my current cassette quite easily, so it still has lots of life in it) Extra BHS hub for bearing parts only Awesome lightweight but robust setup. My estimate the wheelset is around 1600g without wheels and tape. Hand built in Montréal in 2016, and not a dent or bend to speak of, only a few scratches from use. Perfectly true. Excellent condition. OBO!

Up for sale is a great condition Banshee Pyre from 2007. 145mm of plush and supportive travel. Can be built for trail, all mountain, light free ride or XC. I ride trail and xc and had this built up around 27lbs. This bike rides super well and is really fun. It has the initial VPP style suspension from Banshee with needle bearings in the pivots that need little if any maintenance. The headtube is for 1-1/8" forks. Geometry is excellent for all around trail riding and feels ahead of its time with a low bottom bracket height even with a 150mm fork, a 73 degree seat angle and a 68 degree head angle. The seat tube is 19.5" and the effective toptube length is 24.5". I'm not an air person, but this has been amazing on epic trail rides in Revelstoke, Whitehorse, Carcross, Kamloops, and my previous home of Edmonton - light and agile, stable and bombproof. I never found the limits of the suspension, it was a far more capable machine than I. Only selling because I found a new Banshee that I couldn't pass up and have been drooling over for the past few years. Also included is a dartmoor headset, seatclamp, and bottom bracket. Great condition Fox RP3 recently charged by Fox and rebuilt - the recharge transformed the ride quality. Its amazing in small bump compliance but also excellent pedaling efficiency. I've never really have had to change the 3 settings beyond the lowest propedal setting. This is a really great frame in excellent condition with only a few scuffs and scratches mostly from the car rack. $300 (Will ship UPS or Canpar - buyer to pay shipping - roughly 50$ by canpar to most areas of the country)