Feb 16, 2015 at 13:45Feb 16, 2015
I'm selling my OneUp Components 40T Sprocket along with their 16T cog. This will replace both 15T and 17T cogs on your compatible cassette, giving you buttery smooth shifting. Both cogs are compatible with Shimano and SRAM cassettes, that's what the spacer that comes with the 40T is for. They were used just over 400 miles so there's still a ton of life left in these cogs. I'm selling it because I got a new bike and the green doesn't match so I picked up a new one. Please check out their website for compatibility info and installation instructions. I ran this with my XT cassette and Zee rear derailleur, no need for a new B-limit screw. Shipping is $3 within the US, but would prefer local pickup (Seattle).
mayonays dbaker's article
Jan 28, 2015 at 13:42Jan 28, 2015
Interview: Matt Erbentraut
I know these photos aren't from a race, but many guys race with two helmets and swap them out for the ride up vs down. Makes sense to just use the same eye protection regardless of helmet. Or perhaps he just doesn't own glasses. Or they were broken. Or he simply prefers goggles.
Jan 16, 2015 at 10:02Jan 16, 2015
I'm selling an excellent condition used Spank Spike Race stem, 50mm length, in black. Fits 31.8mm handlebars, has a 35mm stack height, 0 degree rise, and comes with their "snap fit" sealed topcap. No headset preload bolt, it got lost in my parts bin unfortunately... $3 shipped with in the US, $5 to Canada. Prefer local pickup in/around Seattle.
Jan 16, 2015 at 9:57Jan 16, 2015
I'm selling a great condition used Shimano XT rear brake, model M785-B. This means it's the i-spec B if you're wanting to mount your compatible levers and clean up your bars a bit. It's got the finned brake pads, which have a decent amount of life left in them. Does not come with any adapters, but does come with 2 mounting bolts/washers and the pad spacer. Hose was shortened to 145cm, or 57 inches, to fit my medium Knolly Warden. Ridden about 30 times since installed in June, no crashes or damage to the brake at all. Bled in October and only about 10 rides since then. Shipping is $6 within US and $9 to Canada. Prefer local pickup in/around Seattle.
Jan 16, 2015 at 9:18Jan 16, 2015
I'm selling a used but great condition Shimano Saint M820 10-speed rear shifter + cable/housing. The housing is 167cm long, thats about 65 and 3/4 inches, and fit my medium Warden frame like a loose glove. No issues with shifting, works like the day I installed it. Used maybe 30 times since June. This is NOT the i-spec version, as you can see on the box that I'm throwing in for free! Shipping is $4 within US, $7 to Canada. Local pickup in/around Seattle preferred.
Jan 16, 2015 at 9:09Jan 16, 2015
I've got a shiny, brand new, never installed, Extended Range (EX) Cog made by e*thirteen. This is the black 42T Shimano version that will work with 10-speed 11-36 cassettes. Please make sure your cassette/drivetrain will work with this before buying. You can read the FAQ on e13's website here - http://bythehive.com/e-thirteen/components/extended-range-ex-cog/ This won't work with my setup so it's gotta go! $3 shipped within the US, $5 to Canada. Prefer local pickup in/around Seattle.
Dec 16, 2014 at 14:48Dec 16, 2014
Selling a used but great condition tire, probably around 85% life left. Had it set up tubeless using Stan's so there's some dried fluid on the inside of the casing. No punctures, tears, etc. This is the black chili compound, made in Germany so its good stuff. Will ship anywhere within the US or Canada for $5. PM/text with any questions or offers. Thanks!
Dec 9, 2014 at 9:41Dec 9, 2014
I'm selling my medium Knolly Warden in Day Glo Green with Cane Creek DBAir CS shock. It fits people 5'7" to 5'11" and I'm on the high end of that spectrum and run a longer stem than I'd like to get the fit right. I'm extremely happy with the bike though, so I'm purchasing a large frame for next year. The entire downtube, seatstays, chainstays, and any spots prone to cable rub were covered with 3M cleartape so there's very little in the way of cable rub or scratches. The driveside chainstay was wrapped with thicker silicone tape to prevent any chainslap from messing up the paint. However, the chain did drop off the outside of the cassette once, I've included a picture of the scratch just above the derailleur hanger. I've also attached pictures of the slight amount of cable rub on the headtube, and a couple small paint chips on the lower non-driveside chainstay. Currently looking to sell as frame only, but would be open to selling as a whole or with whatever parts of your choosing. This ad, however, is for the frame only. Message me if you're interested in the complete bike and I can provide a breakdown of parts. Located in Seattle and would prefer local pickup, but will ship at buyer's expense.
Nov 30, 2014 at 18:31Nov 30, 2014
Used but good condition set of DMR V8 pedals for sale. Used for a couple years, no missing pins but some scratches you can see in the pictures. Pictures show one set, both sides of the pedals. Taken apart and cleaned/lubed a few times but missing the end/dust caps. Will ship within the US for $3 or add $2 to Canada.
Nov 30, 2014 at 17:58Nov 30, 2014
Lightly used 661 EVO knee pads in great condition. Were used a dozen or so times last year and I got some new ones that fit my knees a little better. There's a couple of small holes on the back of the pads, can see them in the pic. Comes with the mesh bag as well. Hand washed a couple times so they don't smell like a gym bag. Shipping is $4 within the US, add $2 for Canada.