MetaMatt

Here we have a set of rockshox tora forks 318. 100mm Hasnt honestly had a massive amount of use. Have been in shed for a long period of time. No scratches on the stantions and the seals are still mint. Make a slight squishy noise when used but this is normal and i think after abit of use this should wear through. just because they have been stood for a while. Unfortuantely has a large scratch on the rockshox sticker on the left leg. I would say that the fork leg is a similar colour to the metal it has worn through to. And for 5 pounds you could by a new sticker and peel the worn one off and it would look better. Scratch is from use on a bike rack and not affecting performance. Steerer is still a nice 200mm long and fork has lockout and air adjust with rockshox motion control. Lockout still works correctly and has rebound adjust. Will remove crown race before posting but just fit your new one and your ready to go. Has a star nut fitted and for disc brakes only. Has no v brake bosses. For QR wheel too. Were replaced in the past just due to upgrading the bike, toras are a real good set of for performance on a budget. These are the 2nd set i have had on bikes i have owned and my old ones held up forever before needing a service which made them work well again. Unlike the 302s the 318s have fully replaceable bushings meaning the whole internals can be fixed. These are considerabley better than the 302s and air adjust is a really nice feature to have to get a dialled set up. Lovely forks ready for a new home. would like 80 pounds posted to UK Also if you have any questions please feel free to ask me and ill try my best to answer them

Sr Suntour Raidon Rear shock The eye to eye of the shock is 190mm This shock has been sat new in storage at work for a while. I then bought it as a spare to use while my shock was sent off for a service. So it has only been on my bike for 2 rides. So 2 rides old Nothing to special New condition, can go up to 300 psi and has rebound adjustment. Good cheap spare or replacement. Think they came stock off a carrera banshee. 30 pounds bargain. just ask Any Questions Please feel free to ask. Thanks Matt

Here we have a Rockshox maxle lite that has been used for around 2 months. Has been in my pack as a spare just in case came free with my frame which was bought 2months old, not been fitted since as i prefer the stock one. 50 quid on crc. Not really needed so up for sale. 135 x 12 mm 2 Slight marks as can be seen on pic 1 on the lever. very minor. Offers welcomed If you have any questions please feel free to ask Matt

Here we have a Hope Mono M4 floating rotor in black. Has a few scratches on the face which could be touched up to look new The main issue with this is the rivets which hold the inner spider to the actual disc braking surface are loose. This means they are slightly loose together and it makes a slight rattley noise. Id say theres about a milimetre of play between them. It is rideable with its just im picky and decided to swap. If you could press the rivets you may be able to tighten it up. or maybe get it re riveted. I never looked into the options, Selling a couple of other rotors and getting them again with my new brakes, floating rotors are the way forward. Make sure you understand the issue with them. All offers will be looked at If you have any questions please ask Thanks Matt

Shimano Centrelock rotor 160mm in size Straight true 160 still nice and shiny in the middle, comes with centrelock cap 10 pound posted

Here we have a Hope Mono M6 floating rotor which has been used on my bike for around 9 months. I have been using this rotor with a set of Shimano SLX brakes and had the caliper set incorrectly and it took off the top layer of anodising. tryed touching it up alittle but a better job could certainly be done. If someone did a good job this could look as good as a new one. No loose rivets, no warping and let me tell you these cool down super fast. Selling due to purchase of a set of new brakes with new rotors 20 pound posted Please feel free to ask me any questions Thanks Matt