Block user


Added 8 photos to Specialized-Pitch-Pro
Mar 13, 2015 at 11:45
Mar 13, 2015
okjg okjg's video
Jan 20, 2015 at 12:36
Jan 20, 2015
Can you remove the rebound adjuster ? If so then insert an allen key into the bottom of the rebound damper and check its rotation if it is not turning then a strip down will be reqd.

okjg okjg's video
Mar 24, 2014 at 7:18
Mar 24, 2014
As far as I know they are the same would have to check the Sram site to be 100% sure

okjg okjg's video
Feb 22, 2014 at 16:16
Feb 22, 2014
I usually use Manitou M Prep or Stendec crystal grease but any suspension based grease will be fine.

okjg okjg's video
Jan 14, 2014 at 10:36
Jan 14, 2014
For the grease i prefer Manitou Mprep or you can use stenders crystal grease. For the oil I tend to use either Silkolene or Shell Gemini. Hope this helps

okjg okjg's photo
Dec 11, 2013 at 9:49
Dec 11, 2013
It certainly looks like it but there are 2 different tools available for the sun ringle range of hubs each with different amounts of teeth be sure it's the one you need.

okjg okjg's video
Jun 22, 2013 at 9:53
Jun 22, 2013
No video as such but again almost identical in procedure and very easy to do . I would recommend downloading the appropriate sram guide and follow that as well.

May 10, 2013 at 7:54
May 10, 2013
okjg okjg's photo
Apr 18, 2013 at 15:22
Apr 18, 2013
Hi there in the end used 2 part epoxy putty and filled the ring gear and cast in a large nut once it cured I used a large spanner and removed it then replaced the bearing and the ring gear. Hope this helps.

Jul 23, 2012 at 11:03
Jul 23, 2012
0 comments – Add comment
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2015. All rights reserved.
dv16 0.059068
Mobile Version of Website