pacojensen

So this frame was my go to enduro/trail bike for the off season, downhill hardtail goofing, or long days in the saddle on the Colorado Trail, but I'm swapping out builds to a new frame, so I threw my parts bin at this frame , while leaving a few newer parts in it from the previous build, and the parts bin finished the build......and it came out as an SS. I busted the chain (was using an old SS chain that was stretched), and don't have another to use for SS, but will have one sourced for test rides if interested. What you see here is a: - Titus LocoMoto (L) frame w/ custom Oddity Cycles etch job -2024 RS Lyrik Ultimate 29er w/ buttercups, 140mm, about 50-80 miles on the fork, and in the limited Meadow Green, comes with box and all extra a brand new fork comes with. -Hope Tech3 V4 downhill brakes w/ 203/180 rotors -Magura Vyron eLect wireless dropper w/ remote, 150mm (needs rebuilt) and a One Octane camo saddle - mixed wheelset: WTB i30 rear rim on factory hub, DT Swiss x1900 front rim on dt swiss hub, both are BOOST, 6-bolt, w/ Teravail Honcho 29x2.6 tan wall tires - Canfield 170mm freeride crankset w/ Sram eagle 30t ring, Shimano BB - RACEFACE bars cut to 740mm, w/ Chromag Ranger 32mm stem, cane creek/Stanton headset, and DMR DeathGrips in camo Really fun and massively capable rig, and with just a wee bit of love, this thing could be an absolute ripper! I purposely didn't tie down the rear brake(see picture), as the rear brake will need a new hose and hardware fitted for this frame. The hose is pretty stretched out(this bike is much longer than the last two frames these brakes were on) and you can't fully turn to the right on a hard switchback without possibly ripping the house out. The pads could use a refresh, but still have prolly 40% pad life, so they'll work great for ya for a while. I've found that trickstuff brake pads work great for the hopes! So other than those few tid bits, this thing is ready to take you on new adventures today. Buyer pays shipping and PP fees unless a pickup is arranged. Thanx for checking out the ad and keep that round rubber on the dirt.... at least until you're in freeride mode! Cheers!

BRAND NEW, Titanium, great looking, and well built single crown truss fork for 29+ wheels. You can run true 29+ (29x3.25 tires on 50mm rims), and I bet you could probably fit a 26x4.2 or so on here as well.... Decided to go a different direction with my build, so I gotta sell this to fully fund said direction. Never used, never installed. Comes with Paragon Machine Works axle. Has a 160mm post mount and a tapered headtube. Geo chart is in the photos. Save 18% off what I paid for a completely unused fork just a few months ago. Lemme know if you got any questions. Buyer pays shipping and PP fees. Thanx for peeping the ad, and Happy Trails!

Hello beautiful people, up for sale this time is a gorgeous titanium klunker fat bike. So it's a sad day but I'm putting my beloved commuting, snow romping, trail ripping, swiss-army bike "Baby" up for sale. This is a quite unique build that has come together over the past 3-4 years. I originally had the frame made by an individual who started building Ti bikes in Denver but moved to Minnesota where this was built. I told the builder I wanted an old looking cruiser frame with modern geo and could shred everything from snow/sand to steep gnarly terrain. Even though it's a 197 rear end, it has gobs of room for any wheel size you could possibly come up with! I even rode this bike year round for a year and a half while other bikes were either being built, repaired, or sold. I went with the burliest of components cause i wanted a bike i could literally throw at anything and it would not only survive, but thrive! Here is the current build that is the one for sale, but i could switch out certain parts to lower the price if desired. Details: Frame- Custom Ti twin top tube cruiser fat bike frame, 67 HTA, 76* STA, 44/56 HT, 197mm rear...... Fork- Surly ICT fork, suspension corrected, 15x150mm w/ axle Headset- Chris King inset 2 44/56 in "Mango" Wheels- SURLY Clown Shoe rims on Salsa 15x150 / 12x197 hubs with Vee Snowshoe XXL tires Crankset- Raceface Next R w/ blackspire 30t ring Drivetrain- Microshift Advent X 1x10 Pedals- Burgtec Penthouse MK5 Post- Erikson titanium Sweetpost layback Saddle- Charge Spoon limited Bars- Oddity Lowriser steel Stem- Paul Boxcar 22.2 Brakes- Avid BB7 w/ extra set of Tech 77 black levers as the current ones has the end broke off of one of the Avid levers currently Grips- DMR DeathGrips EXTRAS- 29+ wheelset included! Hope fatsno 12x197 rear and dt swiss 15x110 BOOST front, both on WTB i45 rims ($1000 savings) **DISCLAIMER** The frame has been prepped and sprayed with Spray.Bike spray paint, which is not only pretty resistant to bumps and scratches, but also easy to removed if not waved. will ship at buyers expense as well as paypal fees are up to the buyer. Thanks, and HAPPY TRAILS!

A well loved modern klunker frameset for sale with the steel Dirtbomb frame(BOOST), Surly Krampus fork, Hope headset, axles, choice of crank (Shimano SLX 170mm w/ Raceface 32t ring OR Fsa Gravity Series 2- piece with 34t ring and bashguard), and seatpost clamp (stooge branded, not pictured) included. Showing trail scars as it was used well on the local trails as well as being a commuter. Sorry, don't have the stooge fork, but the Surly could rock 29x3.25 tires on 50mm rims no problem. BB pictured is not included, but have one for either crank. Asking $600 shipped anywhere in the lower 48. Buyer pays PP fees. http://stoogecycles.co.uk/framesets/