rkadri

New in box Schwalbe Tacky Chan Super Gravity Ultra Soft 29x2.4. Price includes shipping in the US.

New in box Schwalbe Tacky Chan Super Gravity Soft 27.5x2.4. Price includes shipping in the US.

New, never used or laced DT Swiss 240 rear hub - 12x157 Superboost 28h Shimano Microspline EXP freehub.

Small Nicolai G1 - 470mm reach is comparable to M/L in most conventional sizing. Set up with 29/27.5 wheels and 240x75 shock, which gives 190mm or 210mm travel between the two settings, and puts the geometry right in the middle of Nicolai's recommendations for the mixed wheel setup with the stock chainstay mutators (effectively the same as using 10mm seatstay mutators). The frame will also come with 6.5mm and 3.5mm seatstay mutators if you would like to run a shorter shock and/or experiment with different geometry settings. The frame was ridden for about six months, but at 5'8", I ultimately, and unfortunately, found that I was more comfortable on a smaller frame than Nicolai offers in the G1. It is in excellent condition, with the only real blemishes being a 1-2mm nick on the seatstay, some rash from chainslap outside the stock guard, and a bit of rock spray on the downtube/bb. Absolutely no structural issues, or anything visible from more than a couple feet away. The attached images should accurately reflect all of this. Nicolai's manufacturing is unparalleled, and the frame should last as long as anything available, in any conditions (I've been riding a G13 for seven years without having to touch a bolt on it, and the G1 makes it look spindly in comparison). Frame has been stripped and rebuilt for sale with many new parts: Fork: Manitou Mezzer Pro 29 - 180mm Shock: Ohlins TTX22M 240x75 with 350lbs spring (I may have other springs if needed, and I also have an Avalanche tuned Rockshox Kage in the same size if you would prefer--I took the pictures with the Ohlins because it looks prettier, but it is custom vs. stock tunes) Brakes: Magura MT5 (NEW) with 203 rotors Wheels: Newmen Evolution A.30 F (new), E.G.30 R (the only part of the bike that shows real use, but these are the most durable aluminum rims I've used so wear is just cosmetic at this point) Tires: Continental Kryptotal Fr - DH Supersoft F (ridden once), Enduro Soft R (NEW) Drivetrain: Sram X01 11-speed derailleur (NEW) and shifter, XX1 cassette, X1 chain (NEW) - 11 speed may be older, but in terms of weight, durability, and performance, I haven't found anything newer to be better Cranks: Shimano XT M8120 165mm (NEW) with XT bb and 34t SLX chainring Seatpost: Fox Transfer 175mm with Shimano lever (lever is new) Saddle: Fabric Scoop Ti Stem: Newmen 40mm Bars: Newmen Evolution 25mm rise, 780mm width (I also have a Syntace 12 degree, 10mm rise bar at 780mm - the Newmen has a couple small marks, while the Syntace is clean) Grips: 77 Designz waffle (NEW) Bike is currently built and ready to ride, so shipping may be delayed up to a week or so for packing.

Large 2016 Norco Aurum Carbon with custom 29/27.5 build. This frame was only ridden part-time for two seasons (lifts only--no winter shuttles) and is in excellent condition. "Mid-pivot" Horst Link design similar to new RAAW Yalla and Frameworks suspension. I had the front triangle professionally painted when new, and just had it resprayed for sale. Note that the respray was a side job for the painter and the gloss finish is not even throughout the frame--the surfaces "outside" the triangle are glossy while the surfaces "inside" the triangle have a bit of texture. Still looks good from a few feet away. Built with many new parts for sale: Fork: Manitou Dorado with all MRD upgrades (IRT dual chamber air spring and TSR purge valves). Set to 180 to preserve geometry with the 29 front wheel (frame was originally 27.5 f/r). Rear shock: Fox RC4 small shaft with 350lbs. Ti spring. Brakes: Magura MT5 NEW (with 203mm MDR-P floating rotors) Drivetrain: Shimano Zee shifter/derailleur NEW, Saint cranks 165 (very used but indestructible) Wheels: DT Swiss FR 560/Syntace MX rear, DT Swiss EX511 front Tires: Maxxis DHRII 3C rear, Schwalbe Magic Mary SG front (both with excellent tread) Handlebar: Spank Spoon 800 NEW (new waffle lock-on grips) Stem: Syntace F55 DM Seatpost: Enve carbon Saddle: Fabric Scoop Shallow Local sale preferred. I will ship, but may take a few days to pack, etc.

Medium RAAW Madonna V2. Front triangle and seatstays have two days of riding on them, while the chainstays have about a year. Only real cosmetic blemish is some heel rub on the drive side chainstay--front triangle is perfect. Many new parts, built as follows: Frame: RAAW Madonna V2 (chainstays set to 445mm, and I will provide 440mm stays from a V1 frame. Chips are also available from RAAW for 440mm and 450mm with the V2 stays) Fork: Manitou Mezzer Pro 180, freshly rebuilt Shock: Marzocchi CR, rebuilt by Avalanche, 65mm stroke gives just over 170mm travel (160mm with 60mm stroke is stock) Brakes: Hayes Dominion A4, 203mm rotors, new pads f/r Wheels: DT Swiss EX 471 rims on 240 hubs, new rear rim Tires: Vee Snap WCE rear, Snap Trail front, both 29x2.35 Cranks: Shimano XT 11spd, 34t ring Shifter/Derailleur: Sram X01 11spd Chain: Sram X1, new Cassette: Sram XG 1150, new Seatpost: Crankbrothers Highline 7 150, new Saddle: Fabric Scoop Shallow Ti Stem: Syntace Megaforce 2 50mm Bars: Spank Oozy 780 low rise, new Grips: One Up, new See more details/geometry at: https://raawmtb.com/pages/madonna-v2

Complete Medium NS Fuzz 27.5. 2015 model, but the geometry is still modern (see chart in image). Frame has been professionally stripped and ceramic coated clear by Embee Performance. Only a couple years' use on the frame, and it has since been kept as a spare. Built for sale with many new parts (details below). Only real blemish is on the non-drive chainstay, with some scrapes along the bottom from a sniper line through some rocks. Mechanically, it has been absolutely solid and has years of life left. Local sale preferred, but I'll ship at my asking price. Build includes: X-Fusion RV1 HLR fork, coil spring with twin tube damper rebuilt and revalved by Avalanche X-Fusion Vector HLR Coil shock - NEW Avid Elixir 9 Trail brakes - NEW DT Swiss EX 471 rims on 350 hubs f/r Shimano Zee shifter and deraillleur, 105 chain and cassette - NEW Shimano Saint 165 cranks Answer Protaper 800mm bars - NEW Syntace F44 stem Thomson Elite seatpost Bontrager Evoke RL saddle

Complete set of Hope Tech V2 brakes with two sets of 203/183 rotors (one floating and one fixed). Rear caliper has been upgraded to the more recent "Evo" version, which shaves a few grams but is functionally the same. Line lengths are 54" and 34"; front pads are like new, and rear pads are at about 50%. These brakes have been reliable since new, and are completely rebuildable with readily available parts for an indefinite service life (unlike Sram/Shimano, which are essentially disposable).

2019 Fox 36 Float Performance 29" fork, 160mm travel with GRIP damper and 44mm offset crown. Boost 15x110 axle. This fork has only been ridden three times, and is in excellent condition--stanchions are free of any blemishes. Steerer tube measures 6.875" with star nut installed. Fox ID: DJYD. Buyer to pay shipping cost.