SamPNW

Fox 34 Factory in great condition. Couple small scratches near the top caps (pictured), but the stanchions are perfect! Fork was on my trail bike since 2018, but I was injured a large portion of that time, so this thing really didn't see a whole lot of trail time. Steerer tube cut to 9 1/8" and should be plenty for most bikes out there. I had quite a bit sticking out on my large frame, but never got around to trimming it down. I prefer local sale, but can ship at buyer's expense.

Excellent condition factory DPS shock. Used lightly for a couple summers. Injured most of the time I had it, so hasn't seen a ton of use, but could probably use a service soon. However, was working well when I took it off and upgraded to a DPX2. Includes mounting hardware for 8x20mm front, and 8x40mm rear eyelet. Custom tune ID DD29. Prefer to sell locally but can ship within US at cost.

Excellent condition Yeti SB95C with lots and lots of upgrades. This is basically a complete custom carbon build. Some scuffs and scratches, but no soft spots in the carbon. Details: Fork: 2016 Pike RCT3 Shock: Cane Creek Inline with the IL air can upgrade. Just serviced from Dirt Labs and received the IL air can upgrade. This is basically a brand new shock. Wheels: Light Bicycle Carbon all mountain 31.6mm internal width rims laced with Pillar Aero X-TRA 1420 black spokes. Hubs: Hope Pro 2 Evo. Completely rebuilt rear hub with phil woods bearings, a new axle and a new freehub a couple months ago. Ready to rock! Tires: New Maxxis Ardent tires. 2.4 in the front and the 2.25 in the rear. 3 rides on the rear tire and none on the front. Brakes: M785 Shimano XT brakes freshly bled with new metallic brake pads. Rotors: 180mm front and back Icetech. Crankset: Raceface Turbine 175 cranks. New at the beginning of this summer 2017. Bottom Bracket: Enduro angular contact ceramic bearings. (these work really well with the side load style raceface crank) Cassette: Shimano XT 11-46t 11 speed. New in 2017 Chainring: 30t Raceface Narrow Wide Derailleur: Shimano XT Shadow+ GS Shifter: Shimano XT 11 speed Seatpost: Giant contact 150mm dropper with custom modified shifter lever on the left side of the cockpit. New in summer 2017. Works perfect. No sag. Stem: Race Face Turbine 70mm (I also have a Thompson 50mm if you'd prefer) Handlebars: Giant contact 750mm width Headset: Cane Creek 40 (upper bearing is the upgraded 110 series) Grips: New Renthal kevlar grips. Recent Maint. Brake bleed New brake pads Shock serviced and upgraded Frame pivot bearings replaced at beginning of this season (injured most of the season so not a lot of use on them) New tires There is some paint chipping around a couple of the frame pivots. This is paint defect and not a structural defect. Touched up paint, but color match isn't perfect. Let me know if you have any questions.

I have a Fox Float Factory 36 29er fork that's in great shape. No scratched on the stanchions and oil was changed at the end of last season and it hasn't been ridden much since. I took the orange stickers off cause it looks badass, 'nough said! I love this fork, the only reason i'm selling is a got a different frame with a Pike, so I thought I'd give that a try. Details: Travel = 150mm (internally adjustable travel 140-160mm) Axle Size - 15mm/20mm conversion kit included Fox Float 36 Fit RC2 1.5" taper steerer (6 7/8" length) Kashima Coated Uppers Adjustments: High Speed Compression Low Speed Compression Rebound Air Pressure