scott-o

These have only covered 25 miles on my new bike so more or less as new! Was really quite shocked how plush these were but already had other forks arranged or I mightve thought twice. One tiny mark on one sticker, less than a mm and some marks around the crown where I removed the lower bearing race as per pictures. Was just going to keep as spares or for if I sell the bike in future but it seems a waste and someone might as well get the use. Steerer is 185mm give or take and star nut installed.

Cotic RocketMax for sale. It was one of the last of the Gen 1 frames and the build at the time got a lot of the newer bits on like 1x12 set up, the 160mm lyrik's etc. Invisiframed from new, including forks and cranks. Cotic frame, bearings replaces not all that long back, cane creek inline coil with 2 lightweight vault springs (one the powedercoat has come off a little, call it patina if you will!) As above, all invisiframed, does have the odd chip here and there, it has been used! 160mm rock shox lyrik rct3's, boost Cotic short stem (35mm) and Cotic bars with Hope grips (grips could do with replacing but I like them worn) Shimano XT brakes with ice tech rotors (203fr, 180r) with Shimano finned pads. Bled not long back. 1x12 SRAM GX drivetrain with vault pedals and bottom bracket replaced not long back. If being fussy the cassette, chain and chain ring are probably due replacement with age but there's zero skipping at all so I haven't yet. Oneup components 170mm dropper with their lever too. Charge Spoon saddle. Hope wheels front and rear. Michelin wild enduros fitted front and rear now. The bike is awesome but I haven't ridden much in the last year and a half and seems too much to keep for the odd uplift day so I'll sell for the right price. Thanks, Scott

Standard spec other than: -Monarch rct3+ rear shock -Ice tech disc rotors 203f and 180r -hope hubs and wtb rims - new cassette, rear freehub/ bearings, mech and chain in last month -Renthal cnc stem -Renthal bars and grips (month old) - cranks replaced last year with sram GX -charge spoon saddle -replaced the air spring in the Rock Shox pikes so front suspension is 150mm, low friction seals fitted and serviced at the same time. -frame bearings replaced last year -new pads fitted 2 months ago - Orange addix Swalbe hans dampf out back and Maxxis 3c shorty up front (2 months old) -New Sram bottom bracket fitted as you can see it’s had a lot of money spent on it recently, hadn’t intended to sell it but just testing the market as the other half has just got a new bike and it’s giving me itchy feet! Bad points - would suggest headset bearings in the next couple months, parts aren’t expensive and could fit myself so sure we can sort something out either way. - reverb dropper post goes up and down but is a rough going down, comes back up fine. Still works so left it. -front brake lever rattles if you don’t have your finger on the lever, still works fine so never replaced it. Little return spring has gone slack in it is all. - not so much a bad point but the bike hasn’t been mollycoddled, it’s been ridden properly and often so does have scratches etc even though it’s been invisiframed from new. Gear cable outer looks damaged from bike carrier but replaced the old inner with the new mech and it’s not worn through so that it lets water and mud in, just cosmetic. Any questions then give me a shout. Cash or bank transfer on collection please. Sounds negative but please don’t turn up then offer me well below what I’m asking and use the bad points above to justify the low offer. I’ve already priced it low because of these. If you want an immaculate bike, this isn’t it.

Wheels only, no tyres. (Could include front and rear ardents in the fancy compound for extra if required) Front one had around 8 months use and the rear one 3-4 months use as I got a new one under warranty. Rear one had slight play when I treated myself to new wheels so I'd suggest it would need bearings replaced, which is reflected in the price. Spokes are bladed. Really light wheelset and rear hub clicks fast and loud if that's your thing! Live near yarm but work in Durham so can be flexible with collection.