singlespeedmatt

Excellent condition. Little use. A few minor marks - see image. HUGO 52 rims - 29” BLACK DT COMPETITION straight pull spokes BLACK DT pro lock nipples BLACK HOPE Pro 2 single speed straight pull hubs - VERY RARE!! Front and rear wheels included. Can come with 15mm adapters for the front if needed. Please specify if you would like QR or 15mm adapters. (If not specified, QR will be sent) The rear is 135x10 bolt on. Bolts included. Tubeless tape and valves included in the sale - ready for tyres to be fitted.

Good condition. Rims hardly used and fitted with tubeless tape. Very easy to make normal tyres tubeless. Hubs have had more use but are still going strong. Hubs are the rarer Straight pull version - and the even rarer straight pull singlespeed rear hub! IN RED! Built by hope themselves late last year. Strong and light wheelset. 15mm adaptors front, 10mm bolts for the rear. QR front adaptors can also be sent if required - please email or leave a note. Used tubeless valves also available - please email for prices.

Good condition dual air 26” 150mm forks. 170mm tapered steerer tube. Bought 2nd hand a year ago and hardly used since then. They were serviced just before i bought them. Minor marks on the lowers - see images. 15mm maxle. Hope head doctor bung included and fitted inside the steerer (needs tightening after headset fitted).

Good condition with very little use. Minor marks from use - I’ve tried to show all of these in the images. Scratch on top tube and very small dent on seat tube from transportation. Not from riding! Never crashed. Rideen by a light rider. Shock was rebuild by Upgrade UK less than a handful of rides ago. There’s a problem with stock shocks fitted to the frame that blows up the rebound. This was all replaced and it now works flawlessly. Supplied with horizontal dropouts and vertical geared 135x10 dropouts but can be easily changed to a wide range of different sizes. Works with forks from 120mm to 160mm. 125mm rear travel. 27.2 seatpost. DMR seat clamp included. Tapered headtube - bearings included (does non include headset race) Can be used single speed without a tensioner or geared with full cable outer. 26” or 27.5” with adaptor kit - just swap the dopouts. Top tube: 570.1mm (actual) Head tube angle: 68 degree Seat tube angle: 73 degree Seat tube: 366mm (centre to top) Wheel base: 1120mm Bottom Bracket height: 345mm (with a 140mm travel fork (based on a Fox 36 – unloaded) Botton Bracket Type: 73mm Euro. Max fork travel: 160mm Single Crown Chainstay Length: 435mm Head Tube Length: 115mm Seat Clamp Size: 30mm Seat Post Size: 27.2mm Frame weight: 9.1lbs